Missing Interface Home Page › Forums › Network Management › ZeroShell › Missing Interface This topic contains 0 replies, has 0 voices, and was last updated by mhale87 9 years, 7 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts July 15, 2009 at 10:37 pm #41790 mhale87Member I have 2 NIC interfaces on my PC. ZeroShell is installed directly (no VMware or anything). However, only ETH01 is showing up. I’m guessing the other should be called ETH02 but it’s not showing anywhere. Both interfaces are built into the motherboard (p4sce I believe), and are gigabit nics. Any idea? I’d tried everything I can think of 🙁 Than ks July 20, 2009 at 1:00 pm #48452 MatrelomMember The first NIC should show up as ETH00 and the second will show up as ETH01. You will also notice that you will have a VPN99. ETH00 is your internal interface ETH01 is what you would connect to the Internet VPN99 is your virtual adapter for VPN connectivity I have had problems in the past with NIC not being recognized. In particular ISA cards. So if you are seeing ETH01 I am not sure why you aren’t seeing ETH00. Double check in the NETWORK tab. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.