MikroTik to ZeroShell LAN-to-LAN Setup Home Page › Forums › Network Management › ZeroShell › MikroTik to ZeroShell LAN-to-LAN Setup This topic contains 1 reply, has 0 voices, and was last updated by redtdi 10 years, 4 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts November 29, 2008 at 10:12 pm #41328 redtdiMember Hello: I would like to setup a VPN that attaches a MikroTik router using OpenVPN client to a ZeroShell server in LAN-to-LAN mode. Has anyone done this? What encryption and cypher does the LAN-to-LAN ZeroShell implemention use? Thanks in advance, Ken November 30, 2008 at 8:39 am #47226 imported_fulvioParticipant You shouldn’t have any problem. Do not worry about the encryption used, because OpenVPN auto negotiate the best available on the both the peers of the VPN. Regards Fulvio November 30, 2008 at 5:53 pm #47227 ghmorrisMember Very cool. Fulvio, if you are running Zeroshell on an Alix, is AES hardware encryption support automatic, or do you have change a setting somewhere? I read you had incorporated it into the new kernel… Having AES hardware encryption accleration on a Geode is really something. George Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.