Memory Used Home Page › Forums › Network Management › ZeroShell › Memory Used This topic contains 1 reply, has 0 voices, and was last updated by igork 3 years, 3 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts November 3, 2015 at 7:37 pm #44432 igorkMember Hello, My ZS is installed on a device with 8GB of memory. When I check statistics for ZS, I see the that Current Used RAM is 983.0 MB (36.0%). At the same time, it shows Max Used RAM is 1023.0 MB (37.5%), which is also incorrect. Why is that? Why does it show that 983.0 MB is 36.0% of my memory? Can ZS use more than 2GB or RAM? November 17, 2015 at 7:10 am #53950 alpha_wallMember Hi in order to use 8GB of Ram you need the 64-bit image if I am not mistaken. 32 bit is limited to 4GB which would roughly match the % shown. November 17, 2015 at 2:46 pm #53951 igorkMember I use 64-bit image. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.