Maxon BP3-USB Modem works on beta13 Home Page › Forums › Network Management › ZeroShell › Maxon BP3-USB Modem works on beta13 This topic contains 1 reply, has 0 voices, and was last updated by hvgsit 9 years ago. Viewing 1 post (of 1 total) Author Posts September 1, 2010 at 1:26 am #42619 hvgsitParticipant I can confirm that this works well on Beta 13. Using with Telstra (Bigpond) NextG. (A 3G 850MHz network) Settings used were APN – telstra.internet Dial String – *99# Optional AT String – AT+CPIN=xxxx where xxxx is the 4 digit pin code. I can also confirm that the Telstra Elite modem (Qualcomm Sierra Wireless USB 308) does not work. Regards, Phil Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.