Manuall Changing MTU Home Page › Forums › Network Management › ZeroShell › Manuall Changing MTU This topic contains 2 replies, has 0 voices, and was last updated by jacobsa 2 years, 2 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts June 23, 2009 at 11:31 pm #41741 jacobsaMember Hi guys, I have noticed my MTU is connecting at 1492, but I need to change this to 1500. Cannot find where to do this in Zeroshell. Can anyone point me in the right direction please? Thanks June 24, 2009 at 11:26 pm #48308 jacobsaMember In case this helps anyone else. From the shell: ip link set dev ppp0 mtu 1500 Cheers, Aaron November 26, 2016 at 12:52 pm #48309 jpJxPhOuhvqcParticipant Sorry to bump an old topic but I’d like to say thank you jacobsa! I was after information on how to do this. November 28, 2016 at 5:37 pm #48310 DrmCaParticipant Include that line in the startup script and it will be applied every reboot. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.