MAC clone?

Home Page › Forums › Network Management › Networking › MAC clone?

This topic contains 2 replies, has 0 voices, and was last updated by  computationalerr 9 years, 5 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 22, 2009 at 6:08 pm #41688

    computationalerr
    Member

    Is there a way to set a different mac address for eth01? I set my modem in bridge mode, and did the “verizon setup” that makes your dsl work here. It now likes the mac of my laptop and nothing else. Internet works just fine on my laptop but no other computers. I want to clone that mac address to eth01 to make the modem happy.
    Thanks, CHris

    May 22, 2009 at 6:43 pm #48130

    computationalerr
    Member

    I changed the mac on my laptop to that of eth01 so i could register with verizon with that mac, but the internet worked without having to register. what would cause ZS to not get a dynamic ip from the modem? I am set for dhcp on my laptop and that is how it is getting its ip.

    May 25, 2009 at 6:35 am #48131

    ppalias
    Member

    With the interface down, this should do the work:

    ifconfig ETH01 hw 00:01:02:03:ab:cd

    then set the interface up again.

    January 25, 2010 at 1:50 pm #48132

    Marcelo
    Member

    Hi,

    Maybe this can help you guys. I have successfully clonned my MAC address at boot time using the pre-boot script

    ifconfig eth0 hw ether XX:XX:XX:XX:XX:XX

    (yes, I used eth0 and not ETH00 as this will execute before the interface being renamed by Zeroshell)

    Good luck!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.