Load balancing – Same gateway different interfaces Home Page › Forums › Network Management › Firewall, Traffic Shaping and Net Balancer › Load balancing – Same gateway different interfaces This topic contains 2 replies, has 0 voices, and was last updated by luvare 8 years, 10 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts August 18, 2010 at 8:28 pm #42595 luvareMember Hi I want to configure in the NetBalancer two Gateway Configurations with the same ip address but different interface , but i only can configure or the ip address or the interface. Any ideas? Thx and Best Regards! August 19, 2010 at 7:38 am #50943 ppaliasMember I would suggest bridging the interfaces and using them as one. August 19, 2010 at 4:22 pm #50944 luvareMember But.. if i do this, i can’t set “Balancing Rules” 🙁 more ideas? Thx and Best Regards August 21, 2010 at 11:34 am #50945 ppaliasMember Then change the IP address of one of the two interfaces you are using as gateways as well as the IP address of the gateway. Then you will be able to use netbalancer. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.