load balancing on 2 wan

Home Page › Forums › Network Management › Networking › load balancing on 2 wan

This topic contains 0 replies, has 0 voices, and was last updated by  brizou 5 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 3, 2013 at 3:19 pm #43751

    brizou
    Member

    Hello everyone

    here’s my configuration

    eth0 is my lan
    eth01 is the first wan
    eth02 is the second wan

    I would like eth01 to be my default interface and eth02 to be the interface for everything whicj connect on tcp port 453

    Does anyone knows how to do that, iptable can do that apparently..(the article is in frenchbutyou might recognize the command line)
    https://brizou.fr/respawn/dossierrespawn/public/2013-09-28-23-44-07/

    Thank you very much

    November 9, 2013 at 11:43 am #52929

    arcade_ali
    Member

    nice post………

    how to remove freckles

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.