List of all active connections

Home Page Forums Network Management ZeroShell List of all active connections

This topic contains 8 replies, has 0 voices, and was last updated by  Montikore 1 year, 11 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #44483

    Montikore
    Participant

    Hi all,
    After having searching for a way to get the list of all active connections going through zeroshell, i’m a bit surprised not to find anything…
    I would need to have the list of IPs and ports for all active TCP connections (and eventually UDP streams), especially to monitor the use of virtual servers. Do i need another tool?

    Thank you!

    #54013

    Montikore
    Participant

    nobody does that to monitor incoming/outgoing connections??

    #54014

    redfive
    Participant

    Tried with CNTop button, on the Setup page, or even in firewall, connection tracking ?
    Regards

    #54015

    Montikore
    Participant

    Thanks for your tips, but CNTop button shows only connexions sending/receiving enough data, is refreshed every seconds so it’s not possible to monitor active connexions, and, for example, a classical SSH connexion will never appear here.
    Regarding the firewall logs, indeed the information can be retrieved… but you will need another tool to analyse the logs… it is clearly impossible to monitor active connexions reading the logs.

    #54016

    itanveer
    Participant

    Hello,

    I am not sure if you already found the solution, but here i want to share how i am doing.

    1. In the Captive Portal, you can see the connected clients.

    or

    2. Open the Log viewer and select Radiusd category, in the filter type Login….. it will show you all the login related entries….as soon as any new user is authenticated on the system, in the log it will appear.

    Hope this helps

    Ilyas

    #54017

    Montikore
    Participant

    Hi,

    Thanks for the answer. Not found and using external tools 😉
    I don’t know the captive portal tool, i’ll have a look to the doc!
    For the logs, i don’t have a radiusd category (the radius server being up)… but i’m not sure this is what i want, as i want to monitor all IP connexions.

    Thanks

    #54018

    itanveer
    Participant

    You need to turn on REDIUS to be able to see users who are getting authenticated

    Turn on Accounting to log the users data usage

    #54019

    Montikore
    Participant

    but i dont want it to be based on the users

    #54020

    itanveer
    Participant

    then you need to install the add-on package “40e00, NTOP – Web-based traffic analysis and flow collection 2.4”

    with NTOP you can monitor all types of connection and also monitor different applications, e.g if you selection FLOWS and from application filter, if you select facebook then you will be able to see from which IP connections facebook is running….

    NTOP is much more for good monitoring.

    I am very new to zeroshell world, only 3 wks now and i am very happy with it….

    Hope this helps…

    Ilyas

    #54021

    vitotafuni
    Member

    tcpdump is an option?

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.