Hi,
I currently using two ZeroShell boxes to create a LAN <-> LAN VPN, I can get the VPN tunnel connected, how ever I’m sturggling to route traffic through it.
I’ve got the network setup as follows:
Subnet 1
SERVER 1 <
> ZEROSHELL 1 <
> ADSL 1
SERVER 1 – 192.168.1.100
ZEROSHELL LOCAL (ETH00) – 192.168.1.1
ZEROSHELL WAN (ETH01) – 192.168.7.101
ZEROSHELL VPN00 – 192.168.254.1
ADSL 1 – 192.168.7.1
Subnet 2
SERVER 2 <
> ZEROSHELL 2 <
> ADSL 2
SERVER 2 – 192.168.2.100
ZEROSHELL LOCAL (ETH00) – 192.168.2.1
ZEROSHELL WAN (ETH01) – 192.168.7.102
ZEROSHELL VPN00 – 192.168.254.2
ADSL ROUTER – 192.168.7.2
I’ve tried numerous entries in the routing table, all going out of VPN00 but i’m still struggling to get it route traffic through the VPN tunnel.
Any advice?
Thanks,
Andrew