internet is unreachable from ZeroShell host [SOLVED]

Home Page Forums Network Management Networking internet is unreachable from ZeroShell host [SOLVED]

This topic contains 8 replies, has 0 voices, and was last updated by  aemarx 9 years, 5 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #42513

    aemarx
    Member

    hi all,

    i’m new user here. also new to ZS. I use ZS Release 1.0.beta13 and this is my setup:

    (wifi AP) –> ZS –> (ADSL modem)< -- (my PC) ZS has 2 NIC:
    – 192.168.0.75 connected to wifi ap
    – 192.168.1.5 connected to modem

    the modem has 4 lan port:
    – port#1 connected to ZS
    – port#2 connected to my PC.
    i made connection via modem webadmin. not using pppoe client from ZS.
    the problem is i cant connect ZS to internet but my pc can. wifi user also cant connect to internet. I also tried to connect via ZS pppoe but failed. this is the log:


    06:20:17 pppd 2.4.3 started by root, uid 0
    06:20:17 Using interface ppp0
    06:20:17 Connect: ppp0 < --> /dev/pts/1
    06:20:48 LCP: timeout sending Config-Requests
    06:20:48 Connection terminated.
    06:20:48 Using interface ppp0
    06:20:48 Connect: ppp0 < --> /dev/pts/2
    06:20:53 tcflush failed: Bad file descriptor
    06:20:53 Exit.

    pls help

    #update 1
    after update the modem firmware, I i was successfully connect using ZS pppoe. fyi, my modem is Aztech dsl3100r. now using firmware ver 32.4.4.
    wifi user can also access internet now. but the problem now is my PC which directly connect to the modem cant access the internet. is there any way to make ZS use connection from modem? i mean the modem webadmin internal ppp client.

    sorry for my poor english.

    #update 2
    PROBLEM SOLVED

    #50744

    RDelpopolo
    Member

    Have you set the default gateway on zeroshell?

    #50745

    aemarx
    Member

    @rdelpopolo wrote:

    Have you set the default gateway on zeroshell?

    yes, I set the modem ip as default gateway which is 192.168.1.1.

    #50746

    RDelpopolo
    Member

    can you ping it with the integrated utilities?
    Maybe the interaces are inverted?

    #50747

    aemarx
    Member

    yes, i can ping 192.168.1.1 from ZS. no problem on that.

    it seem like zs cannot resolve ip to domain name.

    #50748

    aemarx
    Member

    PROBLEM SOLVED

    #50749

    RDelpopolo
    Member

    What was the problem?

    #50750

    aemarx
    Member

    i set eth01 to use dynamic ip and it works.

    #50751

    RDelpopolo
    Member

    Probably your ap has the dhcp enabled.

    Does your ap and zs had the same ip?

    #50752

    aemarx
    Member

    im talking about the modem, not ap. i set the modem dhcp enabled and then set eth01 that connected to the modem to use dynamic ip.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.