internal web configuration on another port

Home Page Forums Network Management ZeroShell internal web configuration on another port

This topic contains 1 reply, has 0 voices, and was last updated by  seki 7 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #42805

    seki
    Member

    Hi,

    I have just deployed zeroshell in a soekris box as gateway for my personal network.

    I wonder if there is a possibility for the internal web configuration to listen to another port, thus when I will add my personal web server in the virtual servers settings the configuration website will still be available.

    After looking at the files with the ssh access, it seems that I should modify the Listen parameter in the /etc/httpd/httpd.conf, but I will have also to modify the internal firewall rules that are not accessible in the web configuration.

    Could you give some advice for that ?
    Thanks.

    #51480

    rda
    Member

    ETH00


    ETH01


    LAN


    WAN
    web-server


    Zeroshell


    192.168.1.1


    192.168.1.254


    1.1.1.1

    Virtaul Server
    interface IP Address Protocol local port Remote IP Remote Port
    ETH01 1.1.1.1 tcp 4443 192.168.1.254 443
    ETH01 1.1.1.1 tcp 80 192.168.1.1 80
    ETH01 1.1.1.1 tcp 443 192.168.1.1 443

    #51481

    _dan
    Member

    @seki wrote:

    I wonder if there is a possibility for the internal web configuration to listen to another port, thus when I will add my personal web server in the virtual servers settings the configuration website will still be available.

    Go to Setup > https > HTTPS Web Interface Settings

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.