Interface only operating in 10Mb/s at half duplex Home Page › Forums › Network Management › Networking › Interface only operating in 10Mb/s at half duplex This topic contains 0 replies, has 0 voices, and was last updated by switch 10 years, 11 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts September 1, 2008 at 8:40 am #41168 switchMember Hi, im running ZeroShell Beta 10 on a mini itx board. Basicly the onboard nic and suplement card both have full duplex and 100Mb/s support. Confirmed in other distro’s and card diagnostics I have tried forcing the link speed using ethtool to set it to 100Mb/s It starts off at 10Mb/s half duplex I can force it to 10Mb/s Full duplex but cannot get it to work at 100Mb/s at any duplex. its a RealTek8100c chipset (according to the lables on the chip) using the RealTek RTL-8139/8139C/8139C+ (rev 10) driver according to Zeroshell web interface Any help would be greatly recieved September 2, 2008 at 5:08 am #46877 switchMember UPDATE: Fixed, or it fixed its self. no idea how. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.