Interface Masters N2265 Driver

Home Page Forums Network Management Networking Interface Masters N2265 Driver

This topic contains 0 replies, has 0 voices, and was last updated by  levon 7 years, 7 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #43094

    levon
    Member

    I have 2 of these cards but do not have the drivers or driver source available.

    Anyone here have this?

    I would really like to get this project going for my office.

    Thanks!

    #51919

    levon
    Member
    Quote:
    From: AtroposX

    http://www.mediafire.com/?tapxalvdszjl99j

    Zip file contains a pre-compiled .ko driver, the original source code from Interface Masters, as well as their PDF documentation.

    Since the kernel is the same in beta12 up to the newest of beta15, it should still work on beta15 as well.

    You’d need to also use a startup cronjob on the System/Setup -> Startup/Cron section, such as:

    # Startup Script
    echo “3600” > /proc/sys/net/ipv4/netfilter/ip_conntrack_tcp_timeout_established
    echo “1048576” > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
    echo 134217728 > /proc/sys/kernel/shmall
    echo 134217728 > /proc/sys/kernel/shmmax
    cd /Database/niagara2265_r10/;./n2265_load;./n2265_util -a;./n2265_util -0
    ethtool -K ETH02 tso on;ethtool -K ETH03 tso on

    Those are my custom settings, the last two commands are where the .ko driver. It will cd into the directory, load the driver with “n2265_load”, then use the n2265 utility to turn the heartbeat on Active/Bypass mode, Active if has a heartbeat, then kicks into bypass mode if no heartbeat. Then the last line, ethtool, turns the tso for checksums to be offloaded onto the card’s hardware rather than on the CPU, and misc other offloading features the card can do. Have fun, it’s been such a great card.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.