Installing web server behind zeroshell

Home Page Forums Network Management ZeroShell Installing web server behind zeroshell

This topic contains 1 reply, has 0 voices, and was last updated by  vogler 3 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44217

    vogler
    Member

    I would like to know the basic steps to configure zeroshell for visibility in internet of a web server installed in my intranet.

    Thanks in advance.

    #53731

    alpha_wall
    Member

    Add a virtual server in the zeroshell web interface. Make sure you specify all required ports.
    You can also setup routes to do it.

    Make sure your web server is secured. Ideally you may want to have it in the DMZ and not your internal network

    #53732

    vogler
    Member

    Thanks but what are the basic rules that should be put on the firewall for my webserver be seen from the outside. I’ve created the virtual server and i tried authorize all http traffic but my webserver still can’t be seen from the outside.
    Thanks in advance.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.