Install USB Ethernet Drirvers

Home Page Forums Network Management ZeroShell Install USB Ethernet Drirvers

This topic contains 1 reply, has 0 voices, and was last updated by  achillf 1 year, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44789

    achillf
    Member

    hello i have this usb adapter and zeroshell dont recognize.
    How can i install drivers in zeroshell?
    I type in Scripts/Cron command

    lspci -v

    and the result is:

    00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, fast devsel, latency 0
    Capabilities: [e0] #09 [5109]

    00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, fast devsel, latency 0, IRQ 10
    Memory at e0400000 (32-bit, non-prefetchable) [size=512K]
    I/O ports at 10c0
    Memory at d0000000 (32-bit, prefetchable) [size=256M]
    Memory at e0480000 (32-bit, non-prefetchable) [size=256K]
    Expansion ROM at [disabled]
    Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
    Capabilities: [d0] Power Management version 2

    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, fast devsel, latency 0, IRQ 11
    Memory at e04c0000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
    Capabilities: [70] #10 [0091]

    00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
    I/O behind bridge: 00002000-00002fff
    Memory behind bridge: 40000000-401fffff
    Prefetchable memory behind bridge: 0000000040200000-0000000040300000
    Capabilities: [40] #10 [0141]
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
    I/O behind bridge: 00003000-00003fff
    Memory behind bridge: e0500000-e07fffff
    Prefetchable memory behind bridge: 0000000040400000-0000000040500000
    Capabilities: [40] #10 [0141]
    Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
    Capabilities: [90] #0d [0000]
    Capabilities: [a0] Power Management version 2

    00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 20
    I/O ports at 1000

    00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 18
    I/O ports at 1020

    00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 21
    I/O ports at 1040

    00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 22
    I/O ports at 1060

    00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 20
    Memory at e04c4000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] #0a [20a0]

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
    Capabilities: [50] #0d [0000]

    00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0
    Capabilities: [e0] #09 [100c]

    00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, medium devsel, latency 0, IRQ 17
    I/O ports at 01f0
    I/O ports at 03f4
    I/O ports at 0170
    I/O ports at 0374
    I/O ports at 10a0

    00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
    I/O ports at 10d8
    I/O ports at 10f0
    I/O ports at 10e0
    I/O ports at 10f4
    I/O ports at 10b0
    Capabilities: [70] Power Management version 2

    3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)
    Subsystem: Hewlett-Packard Company: Unknown device 3012
    Flags: bus master, fast devsel, latency 0, IRQ 26
    Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data
    Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+
    Capabilities: [d0] #10 [0001]

    #54433

    DrmCa
    Participant

    This will not be the answer you are looking for, but do not use a USB net adapter. Performance is going to suffer. Been there done that.

    #54434

    reaperz
    Member

    Hello

    Right answer is to do some research before buying. I have serveral USB network adapters working for years with Zeroshell. More discussed in this thread:

    https://www.zeroshell.org/forum/viewtopic.php?t=4161&highlight=usb

    Both HG20F9 (cheap chinese white USB NIC) and Belkin F5D5055 work fine, for 2 years now. I would recommend Belkin F5D5055, it is solid!

    PS. You have to restart the Zeroshell machine after connecting the USB NIC. Only then will the new interfaces appear. Just in case you did not try it already.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.