Install to hdd Home Page › Forums › Network Management › ZeroShell › Install to hdd This topic contains 1 reply, has 0 voices, and was last updated by Terabyte 9 years, 4 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts October 1, 2009 at 2:27 am #41946 TerabyteMember Hi, Whenever I install to HDD I get the GRUB> prompt. This happened after following the recommended tutorial http://digilander.libero.it/smasherdevourer/schede/linux/Zeroshell%20su%20HD-EN.pdf I follow the tutorial to the end, but on reboot, I get a grub prompt. Any ideas? October 1, 2009 at 2:42 am #48841 TerabyteMember so after trying this: http://www.zeroshell.net/eng/forum/viewtopic.php?p=2180#2180 I now get Probing  USB and SATA devices to startup the system I did this: note: I use /dev/hda but be sure you use whatever path corresponds to your hd root@zeroshell root> fdisk /dev/sda > a > 1 > w On reboot, it got to @decompressing linux… done booting the kernel. Probing etc…. … Kernel panic – not syncing: VFS: Unable to mount roof fs on unkown – block (1,2) October 1, 2009 at 12:30 pm #48842 TerabyteMember fixed by going into gparted and unmounting the disk first before setting the bootable flag to 1 (rightclick set flags) Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.