im getting this when im trying to add a virtual server port

Home Page Forums Network Management ZeroShell im getting this when im trying to add a virtual server port

This topic contains 3 replies, has 0 voices, and was last updated by  hack2003 6 years, 11 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #40640

    hack2003
    Member

    Jun 03 21:32,30 ERROR: mkdir: cannot create directory `/var/register/system/net/router/PAT/08′: Read-only file system/root/kerbynet.c..

    maybe someone can help me?

    #45391

    imported_fulvio
    Participant

    Could you post the results of the commands
    mount
    and
    ls -l /var/register

    Have you tried to reboot the system?

    Fulvio

    #45392

    hack2003
    Member

    and then i couldn’t write any settings on the server untill im restarting the server.

    #45393

    vcp_ai
    Member

    I’m having same problem, trying to add a new Virtual Server.
    Message appears on main page:
    Feb 11 21:18,41 ERROR: mkdir: cannot create directory _/var/register/system/net/router/PAT/32′: Read-only file system/root/kerbynet.c…

    My release is 1.0 Beta13

    Results of commands are :
    root@zeroshell root> mount
    /dev/ram2 on / type ext2 (rw)
    proc on /proc type proc (rw)
    /dev/sda2 on /cdrom type iso9660 (ro)
    none on /sys type sysfs (rw)
    devpts on /dev/pts type devpts (rw,gid=4,mode=620)
    shm on /dev/shm type tmpfs (rw)
    usbfs on /proc/bus/usb type usbfs (rw)
    /dev/sda1 on /boot type ext2 (ro)
    /udev/sda3 on /DB type ext3 (rw,noatime)
    /DB/_DB.002 on /Database type none (rw,bind,noatime)
    root@zeroshell root>

    root@zeroshell root> ls -l /var/register
    lrwxrwxrwx 1 root root 23 Jul 3 2010 /var/register -> /Database/var/register/
    root@zeroshell root>

    I’m working from a USB stick.

    I’ve not rebooted recently the system, bu remenber to do it 2 or 3 times after migration from Beta12 to Beta 13….
    System is on a remote site, and I do not like to reboot without been in front of the box….

    I have 20 Virtual Servers, and they were imported form my previous 1.0Beta12 Release. It is the first time from migration from Beta12 to Beta13, that I try to add a new Virtual Server.

    Best Regards

    Vicente

    #45394

    bbozo
    Member

    I have same problem as of today.
    ls -l /var/register
    and
    mount
    are the same vcp_ai posted
    I also use usb
    my ZS ver is 1.0 beta 14

    oh yes and I can’t add firewall rules it says:
    Rule does not exist

    Any info would be great
    Oh yes
    Did any of you seen or heard fluvio?

    Fluvio the force is with you where ever you are!!!

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.