I need help for install zeroshell on a shuttle ds437

Home Page Forums Network Management ZeroShell I need help for install zeroshell on a shuttle ds437

This topic contains 0 replies, has 0 voices, and was last updated by  devil 3 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44155

    devil
    Member

    I have a shuttle DS437 with 2 Realtek gbit LAN port’s and a Atheros Wifi card in it.
    I have installed Zeroshell from a USB drive without any problems (create profile, add managment interface, ip and so on).

    BUT i can not login via web interfaces and i dont no why?

    My setup is a DS437 and a notebook, both connected via normal switch.
    I set on the laptop the ip manual to 192.168.0.1 (DS437 has 192.168.0.75) but no connection.
    Then i changed the ip from zeroshell to 192.168.1.5 and change the laptop to 192.168.1.1 but no connection.
    I dont know what can i do next for a login via web interface.

    #53628

    maccowley
    Member

    This could have many reasons.
    – Normally Zeroshell has DHCP turned on on the LAN port. You don’t need to give your laptop a static IP.
    Did you try to connect to Zeroshell with the standard configuration without changing the anything?
    Which version are you using?

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.