I can`t save config

Home Page Forums Network Management ZeroShell I can`t save config

This topic contains 1 reply, has 0 voices, and was last updated by  hamid.moghaddam 10 years, 4 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #41419

    Hi.

    i chenged old IP (192.168.0.75) to new IP (192.168.1.23) and runing DHCP and chenged other settings, but i can`t saved new config after reboot or shutdown. 😥 😥

    Please help me.

    Thanks
    bestregards.
    Hamid Moghaddam

    #47469

    imported_fulvio
    Participant

    If you have not created and activated a storage profile, the configuration is stored in RAM and hence it is volatile.
    From [Setup][Profiles] you have to create a partition on disk (USB, SCSI, SATA and IDE) and then select it for creation/anctivation of the profile.

    After the activation of the profile the configuration and the data will be permanently stored.

    Regards
    Fulvio

    #47470

    Thanks for you Dear Fulvio for about help me

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.