HTTPS through HAVP

Home Page Forums Network Management ZeroShell HTTPS through HAVP

This topic contains 2 replies, has 0 voices, and was last updated by  ais 8 years, 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #41479

    ais
    Member

    Is HTTPS forwarding HAVP in ZeroShell support (configure with –enable-ssl-tunnel)?
    I use HAVP as non-Transoprent proxy and HTTPS queries don’t work (
    Is it possible get HAVP for ZS with support HTTPS forwarding?

    P.S. Why non-transporent 🙂 ? I have many branhches with own’s routers, and routers use OSPF routing. Default routing in OSPF do not target to ZS, this is corhorate needs, according I can’t use ZS as transporent proxy.

    #47630

    ais
    Member

    As nobody has answered me, I answer itself.

    I could compile havp-0.89.tar.gz in ZeroShell, using a method,
    described yuda for installation iptraf. I used ./configure with
    an option – enable-ssl-tunnel and I have got support HTTPS in havp!!
    Also using tips fulvio how to use havp as “normal” proxy I get as a result
    usual non-transparent non-cache proxy with support https.

    So:

    1. Install the package gcc-4.3.2-zs-i386.tar.bz2 from download section.

    2. Compile havp:

    cd /Database
    wget http://www.server-side.de/download/havp-0.89.tar.gz
    tar zxvf havp-0.89.tar.gz
    cd havp-0.89
    ./configure –enable-ssl-tunnel
    make

    3. Create the directory /usr with write access:

    cd /
    mkdir /Database/usr
    cp -rp /usr/* /Database/usr
    rm -f usr
    ln -s /Database/usr usr

    4. Copy new havp binary in sbin:

    cp /Database/havp-0.89/havp/havp /usr/local/sbin/
    chmod 755 /usr/local/sbin/havp

    5. If you want, change havp configuration /root/kerbynet.cgi/template/havp.config,
    in my case is:

    TRANSPARENT false
    PORT 3128

    6. In the section [Setup][Startup] add the following lines to the [Pre Boot] script:

    cd /
    rm -f usr
    ln -s /Database/usr usr
    cp /Database/havp.config /root/kerbynet.cgi/template

    7. Reboot and test.

    It’s all! 🙂

    #47631

    funirob
    Member

    I was just wondering as I reviewed the post you referred to about how yuda compiled the gcc compiler, and I don’t seem to be able to get it to work. What was the exact process you used to install the compiler?

    #47632

    Sacro
    Member

    I’m having a fair bit of trouble setting Zeroshell up to recompile, any chance someone can upload/send me the recompiled havp with ssl support?

    Thanks in advance, Ben

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.