How to setup ethernet VPN bridge

Home Page Forums Network Management VPN How to setup ethernet VPN bridge

This topic contains 1 reply, has 0 voices, and was last updated by  McAfeeactivateTech 8 months, 3 weeks ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #44951

    I am new to zeroshell. I am looking for a solution to deploy a small zeroshell box (OPI R1) with dual ethernetports on the broadband internetmodem of elderly people enabling them to have remote distance videocare over secure (VPN) connection.

    The OPI R1 zeroshell is fully up and running allowing for both ethernet and wifi access to the eth0/NAT port. So wired and wireless IP devices and tablets can be deployed over the NAT’ted internet connection.

    I am loking for instructions from this forum on how to setup the oVPN connection to the likes of VyprVPN/PIA. I am used deploying .ovpn certificates and need some guidance how to tunnel all internet traffic over the VPN connection – I could not make much out of the current documentation and faq’s.
    I AM ALSO SUFFRING FROM THIS ISSUE.http://www.mcafee-activate.info/mcafeeactivate

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.