Help with Proxy settings

Home Page Forums Network Management Transparent Proxy Help with Proxy settings

This topic contains 0 replies, has 0 voices, and was last updated by  jokanga 3 years, 5 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44321

    jokanga
    Member

    Hi everyone,
    Just installed Zeroshell on my network, configured everything via web interface. I am using DHCP for the server to access internet from a router, which works fine because am able to ping other sites on the shell, but i cant access internet from a client connected to the zeroshell.

    Your help will appriciated.

    #53838

    DrmCa
    Participant

    What IP address do you have for the LAN interface of ZS?
    Are you LAN hosts using the IP addresses from the same network?
    Example:

    ZS LAN: 192.168.1.1
    LAN host: 192.168.1.2

    Having made sure of that, ping ZS LAN IP.

    Have you specified the default GW for the LAN hosts to be ZS LAN IP?
    What are you using for DNS on the LAN hosts?
    You can specify DNS on ZS to be OpenDNS IP addresses, block DNS port in the firewall and use ZS LAN IP for the DNS server.

    Please post ipconfig/ifconfig output from the LAN hosts.
    And see if you can ping ZS box from the LAN, then if you can ping DNS server.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.