Having trouble with the setup in VMware Home Page › Forums › Network Management › Linux and Networking › Having trouble with the setup in VMware This topic contains 1 reply, has 0 voices, and was last updated by ljmarent 10 years, 9 months ago. Viewing 1 post (of 1 total) Author Posts November 8, 2008 at 8:14 pm #41277 ljmarentMember Hi all, I’ve used ZS for quite a while now. When I built my new router box, I decided to move ZS into a VM so I could run other apps on this hardware. The host OS is Ubuntu 8.1 There are four physical NICs The LAN is on eth0, the ADSL modem is on eth1, VOIP adapter is on eth3 and eth2 is reserved for FreeNAS. I’ve configured VM to bridge the network cards I’ve configured ZS for pppoe as I would in a non virtual machine, only now the connection is not being made. Any thoughts on what I’m doing wrong? Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.