Group NAT Home Page › Forums › Network Management › ZeroShell › Group NAT This topic contains 2 replies, has 0 voices, and was last updated by guay 10 years, 3 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts November 4, 2007 at 9:30 am #40817 guayMember Is possible assign varius ports (50000-50099) to an IP address a only time? I need to map many ports (100) to a device in my private LAN, but i not as like doing it with an only one step. Thanks for advanced November 5, 2007 at 1:00 pm #45995 guayMember Is possible to assign 100 ports (maped for NAT) in one step only? November 9, 2007 at 11:48 am #45996 guayMember Can I assign nat ports with the CLI shell? I think that i can to do a script for this (assign many ports in only step). Any idea? April 8, 2009 at 10:23 am #45997 adnan25Member I found an answer in another post. http://www.zeroshell.net/eng/forum/viewtopic.php?t=1047 You will be able to select tcp, udp, tcp+udp protocals Works like a charm Adnan Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.