FS Issues

Home Page Forums Network Management ZeroShell FS Issues

This topic contains 9 replies, has 0 voices, and was last updated by  marcus@richters-it.de 1 year, 4 months ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #44037

    SDA: http://www.delock.de/produkte/G_54589/merkmale.html

    SDB: INTEL SSDSA2M160

    20:12:30 [ 5.865312] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    20:12:30 [ 5.865326] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    20:12:30 [ 5.865340] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    20:12:30 [ 5.921697] coretemp coretemp.0: Unable to read TjMax from CPU 0
    20:12:30 [ 5.921790] coretemp coretemp.0: Unable to read TjMax from CPU 1
    20:12:30 [ 5.979192] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    20:12:30 [ 5.979201] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    20:12:30 [ 5.979223] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    20:12:30 [ 6.779589] kjournald starting. Commit interval 5 seconds
    20:12:30 [ 6.779627] EXT3-fs (sda1): mounted filesystem with ordered data mode
    20:12:30 [ 6.874799] ISO 9660 Extensions: RRIP_1991A
    20:12:30 [ 6.998771] EXT3-fs (sda4): error: unable to read superblock
    20:12:30 [ 7.020762] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    20:12:30 [ 7.044801] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    20:12:30 [ 7.045109] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:12:30 [ 7.045122] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    20:12:30 [ 7.045129] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:12:30 [ 7.045135] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:12:30 [ 7.045141] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    20:12:30 [ 7.045145] UDF-fs: Rescanning with blocksize 2048
    20:12:30 [ 7.045180] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    20:12:30 [ 7.045191] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    20:12:30 [ 7.045197] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    20:12:30 [ 7.045202] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    20:12:30 [ 7.150412] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    20:12:30 [ 7.327132] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    20:12:30 [ 7.655073] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    20:12:30 [ 36.116535] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    20:12:30 [ 36.428488] c_rehash used greatest stack depth: 5900 bytes left
    20:12:30 [ 38.880436] ip_tables: (C) 2000-2006 Netfilter Core Team
    20:12:30 [ 39.069951] warning: `named’ uses 32-bit capabilities (legacy support in use)
    20:12:30 [ 39.542104] ctnetlink v0.93: registering with nfnetlink.
    20:12:41 [ 50.190815] Bridge firewalling registered
    20:12:41 [ 50.228551] tun: Universal TUN/TAP device driver, 1.6
    20:12:41 [ 50.228559] tun: (C) 1999-2004 Max Krasnyansky
    20:12:41 [ 50.309792] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    20:12:42 [ 51.115929] r8169 0000:05:00.0: ETH00: link down
    20:12:42 [ 51.115958] r8169 0000:05:00.0: ETH00: link down
    20:12:42 [ 51.116342] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    20:12:42 [ 51.383664] r8169 0000:06:00.0: ETH01: link down
    20:12:42 [ 51.384109] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    20:12:42 [ 51.508785] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    20:12:43 [ 51.652526] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    20:12:43 [ 51.713020] 8021q: 802.1Q VLAN Support v1.8
    20:12:43 [ 51.713047] 8021q: adding VLAN 0 to HW filter on device ETH02
    20:12:43 [ 51.713080] 8021q: adding VLAN 0 to HW filter on device ETH03
    20:12:43 [ 51.730413] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    20:12:43 [ 51.810736] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    20:12:43 [ 51.891327] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    20:12:43 [ 51.972512] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    20:12:43 [ 52.053391] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    20:12:43 [ 52.134391] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    20:12:44 [ 52.792689] r8169 0000:05:00.0: ETH00: link up
    20:12:44 [ 52.792990] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    20:12:44 [ 53.411057] ADDRCONF(NETDEV_UP): VPN00: link is not ready
    20:12:45 [ 53.572738] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    20:12:45 [ 54.046271] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    20:12:45 [ 54.046904] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    20:12:45 [ 54.047506] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    20:12:45 [ 54.048105] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    20:12:45 [ 54.048697] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    20:12:45 [ 54.049993] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    20:12:45 [ 54.050715] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    20:12:45 [ 54.051404] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    20:12:49 [ 58.118574] NET: Registered protocol family 15
    20:12:50 [ 59.210122] ADDRCONF(NETDEV_CHANGE): VPN99: link becomes ready
    20:12:50 [ 59.404729] EXT4-fs (sdb1): re-mounted. Opts: (null)
    20:12:55 [ 63.703518] ETH00: no IPv6 routers present
    20:12:55 [ 64.183038] ETH03.20: no IPv6 routers present
    20:12:55 [ 64.294921] ETH03.90: no IPv6 routers present
    20:12:55 [ 64.374837] ETH03.50: no IPv6 routers present
    20:12:56 [ 64.550667] ETH03.99: no IPv6 routers present
    20:12:56 [ 64.670545] ETH03.10: no IPv6 routers present
    20:12:56 [ 64.758451] ETH03: no IPv6 routers present
    20:12:56 [ 65.046164] ETH03.555: no IPv6 routers present
    20:12:56 [ 65.333864] dummy1: no IPv6 routers present
    20:13:01 [ 70.025135] VPN99: no IPv6 routers present
    20:13:06 [ 75.485016] slapd used greatest stack depth: 5896 bytes left
    20:13:43 [ 112.075346] u32 classifier
    20:13:43 [ 112.075355] Performance counters on
    20:13:43 [ 112.075358] input device check on
    20:13:43 [ 112.075360] Actions configured
    20:20:04 [ 492.998166] kjournald starting. Commit interval 5 seconds
    20:20:04 [ 492.998207] EXT3-fs (sda1): mounted filesystem with ordered data mode
    20:20:04 [ 493.084088] ISO 9660 Extensions: RRIP_1991A
    20:20:05 [ 493.214735] EXT3-fs (sda4): error: unable to read superblock
    20:20:05 [ 493.242780] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    20:20:05 [ 493.270762] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    20:20:05 [ 493.271082] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:20:05 [ 493.271097] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    20:20:05 [ 493.271104] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:20:05 [ 493.271110] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    20:20:05 [ 493.271116] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    20:20:05 [ 493.271120] UDF-fs: Rescanning with blocksize 2048
    20:20:05 [ 493.271165] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    20:20:05 [ 493.271174] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    20:20:05 [ 493.271179] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    20:20:05 [ 493.271184] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    20:20:05 [ 493.294744] EXT4-fs (sda4): unable to read superblock
    20:20:05 [ 493.363117] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)

    #53450

    13:36:20 [2542361.175404] zscp[10333]: segfault at 0 ip b753fc11 sp bfa87dec error 4 in libc-2.14.1.so[b74ce000+160000]
    13:36:20 [2542361.210489] zscp[10332]: segfault at 0 ip b7537c11 sp bfd0b82c error 4 in libc-2.14.1.so[b74c6000+160000]
    13:36:20 [2542361.325456] zscp[10431]: segfault at 0 ip b752ac11 sp bfe2bafc error 4 in libc-2.14.1.so[b74b9000+160000]
    13:36:21 [2542362.357938] zscp[10534]: segfault at 0 ip b7575c11 sp bfd501dc error 4 in libc-2.14.1.so[b7504000+160000]
    13:38:04 [2542465.381267] zscp[11074]: segfault at 0 ip b74dfc11 sp bfcab2dc error 4 in libc-2.14.1.so[b746e000+160000]
    13:38:04 [2542465.390958] zscp[11077]: segfault at 0 ip b75a0c11 sp bfb4ca5c error 4 in libc-2.14.1.so[b752f000+160000]
    13:38:05 [2542466.851538] zscp[11200]: segfault at 0 ip b74d0c11 sp bf87166c error 4 in libc-2.14.1.so[b745f000+160000]
    13:38:10 [2542471.751511] zscp[11309]: segfault at 0 ip b74d1c11 sp bff3cc4c error 4 in libc-2.14.1.so[b7460000+160000]

    #53451

    02:40:24 [ 5.639296] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    02:40:24 [ 5.639457] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    02:40:24 [ 5.644537] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8188000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
    02:40:24 [ 5.644545] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    02:40:24 [ 5.644574] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    02:40:24 [ 5.644731] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
    02:40:24 [ 5.650772] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf818a000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
    02:40:24 [ 5.650781] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    02:40:24 [ 5.674771] iTCO_vendor_support: vendor-support=0
    02:40:24 [ 5.677841] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    02:40:24 [ 5.681223] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    02:40:24 [ 5.683232] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    02:40:24 [ 5.753230] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
    02:40:24 [ 5.753246] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
    02:40:24 [ 5.753266] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    02:40:24 [ 5.753291] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    02:40:24 [ 5.753499] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    02:40:24 [ 5.753626] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    02:40:24 [ 5.753640] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    02:40:24 [ 5.753653] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    02:40:24 [ 5.806376] coretemp coretemp.0: Unable to read TjMax from CPU 0
    02:40:24 [ 5.806402] coretemp coretemp.0: Unable to read TjMax from CPU 1
    02:40:24 [ 5.869449] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    02:40:24 [ 5.869457] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    02:40:24 [ 5.869476] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    02:40:24 [ 6.684065] kjournald starting. Commit interval 5 seconds
    02:40:24 [ 6.684099] EXT3-fs (sda1): mounted filesystem with ordered data mode
    02:40:24 [ 6.782592] ISO 9660 Extensions: RRIP_1991A
    02:40:24 [ 6.910557] EXT3-fs (sda4): error: unable to read superblock
    02:40:24 [ 6.932827] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    02:40:24 [ 6.956866] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    02:40:24 [ 6.957179] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    02:40:24 [ 6.957192] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    02:40:24 [ 6.957199] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    02:40:24 [ 6.957205] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    02:40:24 [ 6.957213] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    02:40:24 [ 6.957217] UDF-fs: Rescanning with blocksize 2048
    02:40:24 [ 6.957252] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    02:40:24 [ 6.957260] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    02:40:24 [ 6.957266] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    02:40:24 [ 6.957270] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    02:40:24 [ 7.062818] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    02:40:24 [ 7.246899] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    02:40:24 [ 7.578938] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    02:40:24 [ 36.178756] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    02:40:24 [ 38.940258] ip_tables: (C) 2000-2006 Netfilter Core Team
    02:40:24 [ 39.128651] warning: `named’ uses 32-bit capabilities (legacy support in use)
    02:40:24 [ 39.578896] ctnetlink v0.93: registering with nfnetlink.
    02:40:35 [ 50.139180] Bridge firewalling registered
    02:40:35 [ 50.177227] tun: Universal TUN/TAP device driver, 1.6
    02:40:35 [ 50.177237] tun: (C) 1999-2004 Max Krasnyansky
    02:40:35 [ 50.258912] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    02:40:36 [ 51.067963] r8169 0000:05:00.0: ETH00: link down
    02:40:36 [ 51.067993] r8169 0000:05:00.0: ETH00: link down
    02:40:36 [ 51.068725] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    02:40:36 [ 51.279757] r8169 0000:06:00.0: ETH01: link down
    02:40:36 [ 51.280399] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    02:40:36 [ 51.400743] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    02:40:36 [ 51.520629] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    02:40:36 [ 51.574536] 8021q: 802.1Q VLAN Support v1.8
    02:40:36 [ 51.574561] 8021q: adding VLAN 0 to HW filter on device ETH02
    02:40:36 [ 51.574596] 8021q: adding VLAN 0 to HW filter on device ETH03
    02:40:36 [ 51.582956] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    02:40:37 [ 51.655443] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    02:40:37 [ 51.728086] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    02:40:37 [ 51.800546] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    02:40:37 [ 51.873418] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    02:40:37 [ 51.946418] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    02:40:37 [ 52.639877] r8169 0000:05:00.0: ETH00: link up
    02:40:37 [ 52.640184] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    02:40:38 [ 53.203432] ADDRCONF(NETDEV_UP): VPN00: link is not ready
    02:40:38 [ 53.318315] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    02:40:39 [ 53.854470] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    02:40:39 [ 53.855103] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    02:40:39 [ 53.855686] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    02:40:39 [ 53.856279] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    02:40:39 [ 53.856869] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    02:40:39 [ 53.857774] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    02:40:39 [ 53.858472] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    02:40:39 [ 53.859166] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    02:40:42 [ 57.187588] NET: Registered protocol family 15
    02:40:43 [ 58.136888] ADDRCONF(NETDEV_CHANGE): VPN99: link becomes ready
    02:40:43 [ 58.308044] EXT4-fs (sdb1): re-mounted. Opts: (null)
    02:40:48 [ 63.375809] ETH00: no IPv6 routers present
    02:40:49 [ 64.135046] ETH03.90: no IPv6 routers present
    02:40:49 [ 64.250934] ETH03: no IPv6 routers present
    02:40:49 [ 64.278897] dummy1: no IPv6 routers present
    02:40:49 [ 64.310876] ETH03.99: no IPv6 routers present
    02:40:49 [ 64.422774] ETH03.50: no IPv6 routers present
    02:40:49 [ 64.622565] ETH03.10: no IPv6 routers present
    02:40:50 [ 64.678499] ETH03.555: no IPv6 routers present
    02:40:50 [ 64.782402] ETH03.20: no IPv6 routers present
    02:40:54 [ 68.738400] VPN99: no IPv6 routers present
    02:41:32 [ 107.042244] u32 classifier
    02:41:32 [ 107.042250] Performance counters on
    02:41:32 [ 107.042253] input device check on
    02:41:32 [ 107.042256] Actions configured
    02:41:33 [ 107.749749] mutt[18582]: segfault at 2b4 ip b771ada8 sp bfd14cb0 error 4 in libncurses.so.5.3[b76f2000+36000]
    03:30:47 [ 3058.787789] mrtgtarget used greatest stack depth: 5992 bytes left
    03:50:47 [ 4257.978926] rateup used greatest stack depth: 5868 bytes left

    #53452

    17:20:18 [ 5.524014] e1000e 0000:02:00.0: Disabling ASPM L0s L1
    17:20:18 [ 5.524250] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    17:20:18 [ 5.524366] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    17:20:18 [ 5.524380] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
    17:20:18 [ 5.524394] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
    17:20:18 [ 5.536796] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    17:20:18 [ 5.536956] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    17:20:18 [ 5.541706] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf81a8000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
    17:20:18 [ 5.541714] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    17:20:18 [ 5.541745] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    17:20:18 [ 5.541899] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
    17:20:18 [ 5.547363] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf81aa000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
    17:20:18 [ 5.547372] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    17:20:18 [ 5.573831] iTCO_vendor_support: vendor-support=0
    17:20:18 [ 5.577196] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    17:20:18 [ 5.581458] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    17:20:18 [ 5.584175] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    17:20:18 [ 5.647968] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
    17:20:18 [ 5.647976] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
    17:20:18 [ 5.647996] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    17:20:18 [ 5.648048] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    17:20:18 [ 5.648234] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    17:20:18 [ 5.648354] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    17:20:18 [ 5.648368] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    17:20:18 [ 5.648382] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    17:20:18 [ 5.707653] coretemp coretemp.0: Unable to read TjMax from CPU 0
    17:20:18 [ 5.707682] coretemp coretemp.0: Unable to read TjMax from CPU 1
    17:20:18 [ 5.766282] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    17:20:18 [ 5.766290] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    17:20:18 [ 5.766309] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    17:20:18 [ 6.630070] kjournald starting. Commit interval 5 seconds
    17:20:18 [ 6.630107] EXT3-fs (sda1): mounted filesystem with ordered data mode
    17:20:18 [ 6.727013] ISO 9660 Extensions: RRIP_1991A
    17:20:18 [ 6.855134] EXT3-fs (sda4): error: unable to read superblock
    17:20:18 [ 6.872877] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    17:20:18 [ 6.896973] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    17:20:18 [ 6.897291] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    17:20:18 [ 6.897305] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    17:20:18 [ 6.897312] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    17:20:18 [ 6.897318] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    17:20:18 [ 6.897324] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    17:20:18 [ 6.897328] UDF-fs: Rescanning with blocksize 2048
    17:20:18 [ 6.897369] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    17:20:18 [ 6.897377] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    17:20:18 [ 6.897383] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    17:20:18 [ 6.897388] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    17:20:18 [ 7.002768] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    17:20:18 [ 7.186862] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    17:20:18 [ 7.519317] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    17:20:18 [ 36.480196] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    17:20:18 [ 38.217378] ip_tables: (C) 2000-2006 Netfilter Core Team
    17:20:18 [ 38.396280] warning: `named’ uses 32-bit capabilities (legacy support in use)
    17:20:18 [ 38.859260] ctnetlink v0.93: registering with nfnetlink.
    17:20:28 [ 48.807005] Bridge firewalling registered
    17:20:28 [ 48.844745] tun: Universal TUN/TAP device driver, 1.6
    17:20:28 [ 48.844752] tun: (C) 1999-2004 Max Krasnyansky
    17:20:28 [ 48.923218] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    17:20:29 [ 49.753327] r8169 0000:05:00.0: ETH00: link down
    17:20:29 [ 49.753348] r8169 0000:05:00.0: ETH00: link down
    17:20:29 [ 49.753873] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    17:20:30 [ 50.025027] r8169 0000:06:00.0: ETH01: link down
    17:20:30 [ 50.025473] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    17:20:30 [ 50.146153] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    17:20:30 [ 50.273950] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    17:20:30 [ 50.333324] 8021q: 802.1Q VLAN Support v1.8
    17:20:30 [ 50.333350] 8021q: adding VLAN 0 to HW filter on device ETH02
    17:20:30 [ 50.333383] 8021q: adding VLAN 0 to HW filter on device ETH03
    17:20:30 [ 50.343813] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    17:20:30 [ 50.451039] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    17:20:30 [ 50.569307] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    17:20:30 [ 50.649524] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    17:20:30 [ 50.733340] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    17:20:30 [ 50.829541] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    17:20:31 [ 51.428428] r8169 0000:05:00.0: ETH00: link up
    17:20:31 [ 51.428727] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    17:20:32 [ 52.049003] ADDRCONF(NETDEV_UP): VPN00: link is not ready
    17:20:32 [ 52.208411] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    17:20:32 [ 52.687679] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    17:20:32 [ 52.688304] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    17:20:32 [ 52.688890] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    17:20:32 [ 52.689479] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    17:20:32 [ 52.690069] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    17:20:32 [ 52.691176] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    17:20:32 [ 52.691924] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    17:20:32 [ 52.692718] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    17:20:35 [ 55.867671] NET: Registered protocol family 15
    17:20:37 [ 56.990767] EXT4-fs (sdb1): re-mounted. Opts: (null)
    17:20:42 [ 62.272947] ETH00: no IPv6 routers present
    17:20:42 [ 62.800427] ETH03.90: no IPv6 routers present
    17:20:43 [ 63.080127] ETH03: no IPv6 routers present
    17:20:43 [ 63.192021] ETH03.10: no IPv6 routers present
    17:20:43 [ 63.255958] ETH03.20: no IPv6 routers present
    17:20:43 [ 63.319892] ETH03.50: no IPv6 routers present
    17:20:43 [ 63.319900] dummy1: no IPv6 routers present
    17:20:43 [ 63.463743] ETH03.99: no IPv6 routers present
    17:20:43 [ 63.527674] ETH03.555: no IPv6 routers present
    17:21:26 [ 106.679333] u32 classifier
    17:21:26 [ 106.679339] Performance counters on
    17:21:26 [ 106.679342] input device check on
    17:21:26 [ 106.679345] Actions configured

    #53453

    21:35:59 [ 5.555017] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
    21:35:59 [ 5.555030] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
    21:35:59 [ 5.573650] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    21:35:59 [ 5.573808] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    21:35:59 [ 5.578871] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8140000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
    21:35:59 [ 5.578879] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    21:35:59 [ 5.578909] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    21:35:59 [ 5.579066] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
    21:35:59 [ 5.585714] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf8142000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
    21:35:59 [ 5.585723] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    21:35:59 [ 5.609874] iTCO_vendor_support: vendor-support=0
    21:35:59 [ 5.612596] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    21:35:59 [ 5.617199] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    21:35:59 [ 5.619657] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    21:35:59 [ 5.681394] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
    21:35:59 [ 5.681402] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
    21:35:59 [ 5.681448] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    21:35:59 [ 5.681474] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    21:35:59 [ 5.681671] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    21:35:59 [ 5.681794] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    21:35:59 [ 5.681808] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    21:35:59 [ 5.681824] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    21:35:59 [ 5.742507] coretemp coretemp.0: Unable to read TjMax from CPU 0
    21:35:59 [ 5.742536] coretemp coretemp.0: Unable to read TjMax from CPU 1
    21:35:59 [ 5.800572] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    21:35:59 [ 5.800580] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    21:35:59 [ 5.800599] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    21:35:59 [ 6.591577] kjournald starting. Commit interval 5 seconds
    21:35:59 [ 6.591616] EXT3-fs (sda1): mounted filesystem with ordered data mode
    21:35:59 [ 6.686967] ISO 9660 Extensions: RRIP_1991A
    21:35:59 [ 6.815003] EXT3-fs (sda4): error: unable to read superblock
    21:35:59 [ 6.836885] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    21:35:59 [ 6.860912] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    21:35:59 [ 6.861224] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    21:35:59 [ 6.861238] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    21:35:59 [ 6.861245] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    21:35:59 [ 6.861251] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    21:35:59 [ 6.861257] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    21:35:59 [ 6.861261] UDF-fs: Rescanning with blocksize 2048
    21:35:59 [ 6.861296] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    21:35:59 [ 6.861304] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    21:35:59 [ 6.861310] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    21:35:59 [ 6.861314] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    21:35:59 [ 6.966468] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    21:35:59 [ 7.143029] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    21:35:59 [ 7.475105] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    21:35:59 [ 36.432230] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    21:35:59 [ 36.737585] c_rehash used greatest stack depth: 5900 bytes left
    21:35:59 [ 39.170999] ip_tables: (C) 2000-2006 Netfilter Core Team
    21:35:59 [ 39.349529] warning: `named’ uses 32-bit capabilities (legacy support in use)
    21:35:59 [ 39.801813] ctnetlink v0.93: registering with nfnetlink.
    21:36:09 [ 49.741170] Bridge firewalling registered
    21:36:09 [ 49.778690] tun: Universal TUN/TAP device driver, 1.6
    21:36:09 [ 49.778697] tun: (C) 1999-2004 Max Krasnyansky
    21:36:09 [ 49.856651] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    21:36:10 [ 50.660339] r8169 0000:05:00.0: ETH00: link down
    21:36:10 [ 50.660358] r8169 0000:05:00.0: ETH00: link down
    21:36:10 [ 50.660700] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    21:36:10 [ 50.868112] r8169 0000:06:00.0: ETH01: link down
    21:36:10 [ 50.868481] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    21:36:11 [ 50.989118] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    21:36:11 [ 51.108986] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    21:36:11 [ 51.160673] 8021q: 802.1Q VLAN Support v1.8
    21:36:11 [ 51.160699] 8021q: adding VLAN 0 to HW filter on device ETH02
    21:36:11 [ 51.160733] 8021q: adding VLAN 0 to HW filter on device ETH03
    21:36:11 [ 51.168582] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    21:36:11 [ 51.238628] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    21:36:11 [ 51.309149] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    21:36:11 [ 51.379155] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    21:36:11 [ 51.449379] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    21:36:11 [ 51.519972] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    21:36:12 [ 52.262147] r8169 0000:05:00.0: ETH00: link up
    21:36:12 [ 52.262449] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    21:36:12 [ 52.719803] ADDRCONF(NETDEV_UP): VPN00: link is not ready
    21:36:12 [ 52.844058] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    21:36:13 [ 53.434848] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    21:36:13 [ 53.435471] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    21:36:13 [ 53.436061] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    21:36:13 [ 53.436661] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    21:36:13 [ 53.437255] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    21:36:13 [ 53.437886] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    21:36:13 [ 53.438625] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    21:36:13 [ 53.439312] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    21:36:16 [ 56.233692] NET: Registered protocol family 15
    21:36:17 [ 57.428647] EXT4-fs (sdb1): re-mounted. Opts: (null)
    21:36:22 [ 62.328833] ETH00: no IPv6 routers present
    21:36:23 [ 63.527619] ETH03.50: no IPv6 routers present
    21:36:23 [ 63.543614] ETH03: no IPv6 routers present
    21:36:23 [ 63.591554] ETH03.99: no IPv6 routers present
    21:36:23 [ 63.679468] dummy1: no IPv6 routers present
    21:36:23 [ 63.735405] ETH03.20: no IPv6 routers present
    21:36:23 [ 63.759381] ETH03.90: no IPv6 routers present
    21:36:23 [ 63.847302] ETH03.10: no IPv6 routers present
    21:36:24 [ 63.991158] ETH03.555: no IPv6 routers present
    21:36:33 [ 73.180303] slapd used greatest stack depth: 5896 bytes left
    21:37:11 [ 111.271131] u32 classifier
    21:37:11 [ 111.271138] Performance counters on
    21:37:11 [ 111.271141] input device check on
    21:37:11 [ 111.271144] Actions configured
    21:37:12 [ 111.998288] mutt[24470]: segfault at 2b4 ip b7704da8 sp bf91a670 error 4 in libncurses.so.5.3[b76dc000+36000]

    #53454

    22:32:06 [119107.712151] kjournald starting. Commit interval 5 seconds
    22:32:06 [119107.712193] EXT3-fs (sda1): mounted filesystem with ordered data mode
    22:32:07 [119107.931352] EXT3-fs (sda4): error: unable to read superblock
    22:32:07 [119107.955148] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    22:32:07 [119107.979116] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    22:32:07 [119107.979434] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:07 [119107.979447] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    22:32:07 [119107.979454] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:07 [119107.979461] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:07 [119107.979466] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    22:32:07 [119107.979471] UDF-fs: Rescanning with blocksize 2048
    22:32:07 [119107.979514] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    22:32:07 [119107.979522] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    22:32:07 [119107.979528] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    22:32:07 [119107.979532] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    22:32:07 [119108.003081] EXT4-fs (sda4): unable to read superblock
    22:32:07 [119108.074985] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    22:32:13 [119114.490511] EXT4-fs (sdb1): re-mounted. Opts: (null)
    22:32:14 [119115.768373] kjournald starting. Commit interval 5 seconds
    22:32:14 [119115.768413] EXT3-fs (sda1): mounted filesystem with ordered data mode
    22:32:15 [119115.987180] EXT3-fs (sda4): error: unable to read superblock
    22:32:15 [119116.010804] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    22:32:15 [119116.034772] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    22:32:15 [119116.035086] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:15 [119116.035099] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    22:32:15 [119116.035107] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:15 [119116.035113] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    22:32:15 [119116.035119] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    22:32:15 [119116.035123] UDF-fs: Rescanning with blocksize 2048
    22:32:15 [119116.035166] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    22:32:15 [119116.035176] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    22:32:15 [119116.035182] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    22:32:15 [119116.035186] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    22:32:15 [119116.058747] EXT4-fs (sda4): unable to read superblock
    22:32:15 [119116.130850] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    22:32:21 [119122.041399] EXT4-fs (sdb1): re-mounted. Opts: (null)
    22:32:21 [119122.092042] EXT4-fs (sdb1): re-mounted. Opts: (null)

    #53455

    14:20:57 [ 3358.108366] UDF-fs: Rescanning with blocksize 2048
    14:20:57 [ 3358.108407] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:20:57 [ 3358.108416] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:20:57 [ 3358.108422] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:20:57 [ 3358.108426] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    14:20:57 [ 3358.132002] EXT4-fs (sda4): unable to read superblock
    14:20:57 [ 3358.203922] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    14:24:41 [ 3582.132196] flush-8:0 used greatest stack depth: 5320 bytes left
    14:48:26 [ 5005.094993] kjournald starting. Commit interval 5 seconds
    14:48:26 [ 5005.095032] EXT3-fs (sda1): mounted filesystem with ordered data mode
    14:48:26 [ 5005.311706] EXT3-fs (sda4): error: unable to read superblock
    14:48:26 [ 5005.335487] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    14:48:26 [ 5005.359459] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:48:26 [ 5005.359760] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:48:26 [ 5005.359773] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:48:26 [ 5005.359780] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:48:26 [ 5005.359787] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:48:26 [ 5005.359793] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:48:26 [ 5005.359797] UDF-fs: Rescanning with blocksize 2048
    14:48:26 [ 5005.359840] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:48:26 [ 5005.359850] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:48:26 [ 5005.359856] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:48:26 [ 5005.359861] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    14:48:26 [ 5005.383426] EXT4-fs (sda4): unable to read superblock
    14:48:26 [ 5005.455416] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    14:53:03 [ 5282.584291] kjournald starting. Commit interval 5 seconds
    14:53:03 [ 5282.584332] EXT3-fs (sda1): mounted filesystem with ordered data mode
    14:53:04 [ 5282.809726] EXT3-fs (sda4): error: unable to read superblock
    14:53:04 [ 5282.832316] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    14:53:04 [ 5282.856312] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:53:04 [ 5282.856617] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:04 [ 5282.856630] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:53:04 [ 5282.856637] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:04 [ 5282.856644] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:04 [ 5282.856649] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:53:04 [ 5282.856654] UDF-fs: Rescanning with blocksize 2048
    14:53:04 [ 5282.856698] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:53:04 [ 5282.856707] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:53:04 [ 5282.856713] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:53:04 [ 5282.856717] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    14:53:04 [ 5282.880263] EXT4-fs (sda4): unable to read superblock
    14:53:04 [ 5282.956377] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    14:53:13 [ 5292.454272] EXT4-fs (sdb1): re-mounted. Opts: (null)
    14:53:15 [ 5293.902197] kjournald starting. Commit interval 5 seconds
    14:53:15 [ 5293.902236] EXT3-fs (sda1): mounted filesystem with ordered data mode
    14:53:15 [ 5294.112982] EXT3-fs (sda4): error: unable to read superblock
    14:53:15 [ 5294.136642] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    14:53:15 [ 5294.160612] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:53:15 [ 5294.160917] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:15 [ 5294.160931] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:53:15 [ 5294.160938] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:15 [ 5294.160944] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    14:53:15 [ 5294.160950] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:53:15 [ 5294.160954] UDF-fs: Rescanning with blocksize 2048
    14:53:15 [ 5294.160998] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    14:53:15 [ 5294.161007] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    14:53:15 [ 5294.161013] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    14:53:15 [ 5294.161018] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    14:53:15 [ 5294.188585] EXT4-fs (sda4): unable to read superblock
    14:53:15 [ 5294.266260] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    14:53:19 [ 5298.327261] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    14:53:19 [ 5298.420592] EXT4-fs (sdb1): re-mounted. Opts: (null)
    18:22:14 [17820.568987] kjournald starting. Commit interval 5 seconds
    18:22:14 [17820.569033] EXT3-fs (sda1): mounted filesystem with ordered data mode
    18:22:15 [17820.785544] EXT3-fs (sda4): error: unable to read superblock
    18:22:15 [17820.809487] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    18:22:15 [17820.833456] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    18:22:15 [17820.833766] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:22:15 [17820.833779] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    18:22:15 [17820.833786] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:22:15 [17820.833793] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:22:15 [17820.833798] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    18:22:15 [17820.833803] UDF-fs: Rescanning with blocksize 2048
    18:22:15 [17820.833844] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    18:22:15 [17820.833853] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    18:22:15 [17820.833859] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    18:22:15 [17820.833863] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    18:22:15 [17820.857429] EXT4-fs (sda4): unable to read superblock
    18:22:15 [17820.921086] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    18:22:31 [17837.079443] EXT4-fs (sdb1): re-mounted. Opts: (null)
    18:22:31 [17837.124373] EXT4-fs (sdb1): re-mounted. Opts: (null)
    18:25:40 [18025.751792] kjournald starting. Commit interval 5 seconds
    18:25:40 [18025.751835] EXT3-fs (sda1): mounted filesystem with ordered data mode
    18:25:40 [18025.961151] EXT3-fs (sda4): error: unable to read superblock
    18:25:40 [18025.984992] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    18:25:40 [18026.008957] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    18:25:40 [18026.009260] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:25:40 [18026.009274] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    18:25:40 [18026.009281] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:25:40 [18026.009287] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    18:25:40 [18026.009293] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    18:25:40 [18026.009297] UDF-fs: Rescanning with blocksize 2048
    18:25:40 [18026.009342] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    18:25:40 [18026.009350] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    18:25:40 [18026.009356] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    18:25:40 [18026.009360] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    18:25:40 [18026.028936] EXT4-fs (sda4): unable to read superblock
    18:25:40 [18026.101238] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    18:26:06 [18051.886288] EXT4-fs (sdb1): re-mounted. Opts: (null)
    18:26:06 [18051.926493] EXT4-fs (sdb1): re-mounted. Opts: (null)

    #53456

    00:45:56 [ 6.698558] e1000e: Copyright(c) 1999 – 2012 Intel Corporation.
    00:45:56 [ 6.698595] e1000e 0000:02:00.0: Disabling ASPM L0s L1
    00:45:56 [ 6.698778] e1000e 0000:02:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    00:45:56 [ 6.698891] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    00:45:56 [ 6.698906] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
    00:45:56 [ 6.698920] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
    00:45:56 [ 6.713215] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    00:45:56 [ 6.713371] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    00:45:56 [ 6.719226] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8108000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
    00:45:56 [ 6.719235] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    00:45:56 [ 6.719262] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    00:45:56 [ 6.719419] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
    00:45:56 [ 6.724919] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf810a000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
    00:45:56 [ 6.724928] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    00:45:56 [ 6.754600] iTCO_vendor_support: vendor-support=0
    00:45:56 [ 6.756660] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    00:45:56 [ 6.760479] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    00:45:56 [ 6.762634] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    00:45:56 [ 6.824592] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
    00:45:56 [ 6.824601] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
    00:45:56 [ 6.824621] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    00:45:56 [ 6.824644] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    00:45:56 [ 6.824835] e1000e 0000:01:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    00:45:56 [ 6.824960] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    00:45:56 [ 6.824975] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    00:45:56 [ 6.824989] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    00:45:56 [ 6.886322] coretemp coretemp.0: Unable to read TjMax from CPU 0
    00:45:56 [ 6.886351] coretemp coretemp.0: Unable to read TjMax from CPU 1
    00:45:56 [ 6.937980] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    00:45:56 [ 6.937988] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    00:45:56 [ 6.938007] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    00:45:56 [ 7.827937] kjournald starting. Commit interval 5 seconds
    00:45:56 [ 7.827975] EXT3-fs (sda1): mounted filesystem with ordered data mode
    00:45:56 [ 8.055528] EXT3-fs (sda4): error: unable to read superblock
    00:45:56 [ 8.076237] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    00:45:56 [ 8.100330] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    00:45:56 [ 8.100653] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    00:45:56 [ 8.100670] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    00:45:56 [ 8.100677] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    00:45:56 [ 8.100683] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    00:45:56 [ 8.100689] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    00:45:56 [ 8.100694] UDF-fs: Rescanning with blocksize 2048
    00:45:56 [ 8.100741] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    00:45:56 [ 8.100752] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    00:45:56 [ 8.100757] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    00:45:56 [ 8.100762] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)
    00:45:56 [ 8.191459] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    00:45:56 [ 8.452495] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    00:45:56 [ 8.809293] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    00:45:56 [ 36.883513] ip_tables: (C) 2000-2006 Netfilter Core Team
    00:45:56 [ 36.966082] EXT4-fs (sdb1): re-mounted. Opts: (null)
    00:45:56 [ 39.609515] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    00:45:56 [ 39.927578] c_rehash used greatest stack depth: 5808 bytes left
    00:45:56 [ 41.701353] warning: `named’ uses 32-bit capabilities (legacy support in use)
    00:45:56 [ 42.146926] nf_conntrack: falling back to vmalloc.
    00:45:56 [ 42.251714] ctnetlink v0.93: registering with nfnetlink.
    00:46:06 [ 52.115772] Bridge firewalling registered
    00:46:06 [ 52.157782] tun: Universal TUN/TAP device driver, 1.6
    00:46:06 [ 52.157793] tun: (C) 1999-2004 Max Krasnyansky
    00:46:06 [ 52.245751] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    00:46:07 [ 53.178435] r8169 0000:05:00.0: ETH00: link down
    00:46:07 [ 53.178456] r8169 0000:05:00.0: ETH00: link down
    00:46:07 [ 53.179257] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    00:46:07 [ 53.502093] r8169 0000:06:00.0: ETH01: link down
    00:46:07 [ 53.502535] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    00:46:07 [ 53.626979] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    00:46:07 [ 53.777123] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    00:46:07 [ 53.857521] 8021q: 802.1Q VLAN Support v1.8
    00:46:07 [ 53.857547] 8021q: adding VLAN 0 to HW filter on device ETH02
    00:46:07 [ 53.857580] 8021q: adding VLAN 0 to HW filter on device ETH03
    00:46:07 [ 53.873289] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    00:46:07 [ 53.963873] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    00:46:08 [ 54.038978] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    00:46:08 [ 54.115171] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    00:46:08 [ 54.316219] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    00:46:08 [ 54.482534] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    00:46:08 [ 54.851180] r8169 0000:05:00.0: ETH00: link up
    00:46:08 [ 54.852196] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    00:46:10 [ 56.125822] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    00:46:10 [ 56.840042] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    00:46:10 [ 56.840578] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    00:46:10 [ 56.841203] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    00:46:10 [ 56.841830] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    00:46:10 [ 56.842457] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    00:46:10 [ 56.843312] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    00:46:10 [ 56.844082] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    00:46:10 [ 56.844810] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    00:46:15 [ 61.217385] NET: Registered protocol family 15
    00:46:16 [ 62.684505] ADDRCONF(NETDEV_CHANGE): VPN99: link becomes ready
    00:46:19 [ 65.078685] ETH00: no IPv6 routers present
    00:46:20 [ 66.856895] ETH03.10: no IPv6 routers present
    00:46:20 [ 66.868880] ETH03.50: no IPv6 routers present
    00:46:20 [ 66.932821] ETH03.99: no IPv6 routers present
    00:46:20 [ 66.940806] ETH03.90: no IPv6 routers present
    00:46:21 [ 67.116633] ETH03.555: no IPv6 routers present
    00:46:21 [ 67.204542] ETH03: no IPv6 routers present
    00:46:21 [ 67.763975] ETH03.20: no IPv6 routers present
    00:46:22 [ 68.251491] dummy1: no IPv6 routers present
    00:46:27 [ 73.214478] VPN99: no IPv6 routers present
    00:46:49 [ 94.992118] squid used greatest stack depth: 5648 bytes left

    #53457

    11:14:08 klogd 1.5.0, log source = /proc/kmsg started.
    11:14:08 Cannot find map file.
    11:14:08 Loaded 26221 symbols from 16 modules.
    11:14:08 [ 0.000000] Initializing cgroup subsys cpuset
    11:14:08 [ 0.000000] Initializing cgroup subsys cpu
    11:14:08 [ 0.000000] Linux version 3.4.82-ZS (root@next.example.com) (gcc version 4.6.3 (GCC) ) #1 SMP Sat Jul 12 18:13:38 CEST 2014
    11:14:08 [ 0.000000] Disabled fast string operations
    11:14:08 [ 0.000000] BIOS-provided physical RAM map:
    11:14:08 [ 0.000000] BIOS-e820: 0000000000000000 – 000000000008f000 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 000000000008f000 – 0000000000090000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 0000000000090000 – 000000000009e800 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 000000000009e800 – 00000000000a0000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 00000000000e0000 – 0000000000100000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 0000000000100000 – 00000000cee98000 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 00000000cee98000 – 00000000ceebf000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 00000000ceebf000 – 00000000ceefa000 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 00000000ceefa000 – 00000000cefbf000 (ACPI NVS)
    11:14:08 [ 0.000000] BIOS-e820: 00000000cefbf000 – 00000000ceff1000 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 00000000ceff1000 – 00000000cefff000 (ACPI data)
    11:14:08 [ 0.000000] BIOS-e820: 00000000cefff000 – 00000000cf000000 (usable)
    11:14:08 [ 0.000000] BIOS-e820: 00000000cf000000 – 00000000d0000000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 00000000e0000000 – 00000000e4000000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 00000000ffe00000 – 0000000100000000 (reserved)
    11:14:08 [ 0.000000] BIOS-e820: 0000000100000000 – 0000000130000000 (usable)
    11:14:08 [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    11:14:08 [ 0.000000] SMBIOS 2.7 present.
    11:14:08 [ 0.000000] DMI: /D2500CC, BIOS CCCDT10N.86A.0037.2012.1217.1723 12/17/2012
    11:14:08 [ 0.000000] e820 update range: 0000000000000000 – 0000000000010000 (usable) ==> (reserved)
    11:14:08 [ 0.000000] e820 remove range: 00000000000a0000 – 0000000000100000 (usable)
    11:14:08 [ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x100000
    11:14:08 [ 0.000000] MTRR default type: uncachable
    11:14:08 [ 0.000000] MTRR fixed ranges enabled:
    11:14:08 [ 0.000000] 00000-9FFFF write-back
    11:14:08 [ 0.000000] A0000-BFFFF uncachable
    11:14:08 [ 0.000000] C0000-DFFFF write-protect
    11:14:08 [ 0.000000] E0000-FFFFF uncachable
    11:14:08 [ 0.000000] MTRR variable ranges enabled:
    11:14:08 [ 0.000000] 0 base 000000000 mask F80000000 write-back
    11:14:08 [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    11:14:08 [ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
    11:14:08 [ 0.000000] 3 base 0CF000000 mask FFF000000 uncachable
    11:14:08 [ 0.000000] 4 base 100000000 mask FC0000000 write-back
    11:14:08 [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
    11:14:08 [ 0.000000] 6 disabled
    11:14:08 [ 0.000000] found SMP MP-table at [c00fbe30] fbe30
    11:14:08 [ 0.000000] initial memory mapped : 0 – 01c00000
    11:14:08 [ 0.000000] Base memory trampoline at [c009d000] 9d000 size 4096
    11:14:08 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    11:14:08 [ 0.000000] 0000000000 – 0000400000 page 4k
    11:14:08 [ 0.000000] 0000400000 – 0037400000 page 2M
    11:14:08 [ 0.000000] 0037400000 – 00377fe000 page 4k
    11:14:08 [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bf8000-0x01bfffff]
    11:14:08 [ 0.000000] RAMDISK: 372d6000 – 37963000
    11:14:08 [ 0.000000] Allocated new RAMDISK: 36c49000 – 372d5a0c
    11:14:08 [ 0.000000] Move RAMDISK from 00000000372d6000 – 0000000037962a0b to 36c49000 – 372d5a0b
    11:14:08 [ 0.000000] ACPI: RSDP 000f2390 00024 (v02 INTEL )
    11:14:08 [ 0.000000] ACPI: XSDT ceffe120 0004C (v01 INTEL D2500CC 00000025 01000013)
    11:14:08 [ 0.000000] ACPI: FACP ceff5000 000F4 (v03 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: DSDT ceff7000 06834 (v02 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: FACS cef95000 00040
    11:14:08 [ 0.000000] ACPI: SSDT ceff6000 0043E (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: APIC ceff4000 00084 (v02 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: MCFG ceff3000 0003C (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: HPET ceff2000 00038 (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: Local APIC address 0xfee00000
    11:14:08 [ 0.000000] 2424MB HIGHMEM available.
    11:14:08 [ 0.000000] 887MB LOWMEM available.
    11:14:08 [ 0.000000] mapped low ram: 0 – 377fe000
    11:14:08 [ 0.000000] low ram: 0 – 377fe000
    11:14:08 [ 0.000000] Zone PFN ranges:
    11:14:08 [ 0.000000] DMA 0x00000010 -> 0x00001000
    11:14:08 [ 0.000000] Normal 0x00001000 -> 0x000377fe
    11:14:08 [ 0.000000] HighMem 0x000377fe -> 0x000cf000
    11:14:08 [ 0.000000] Movable zone start PFN for each node
    11:14:08 [ 0.000000] Early memory PFN ranges
    11:14:08 [ 0.000000] 0: 0x00000010 -> 0x0000008f
    11:14:08 [ 0.000000] 0: 0x00000090 -> 0x0000009e
    11:14:08 [ 0.000000] 0: 0x00000100 -> 0x000cee98
    11:14:08 [ 0.000000] 0: 0x000ceebf -> 0x000ceefa
    11:14:08 [ 0.000000] 0: 0x000cefbf -> 0x000ceff1
    11:14:08 [ 0.000000] 0: 0x000cefff -> 0x000cf000
    11:14:08 [ 0.000000] On node 0 totalpages: 847507
    11:14:08 [ 0.000000] free_area_init_node: node 0, pgdat c1611e40, node_mem_map f5269200
    11:14:08 [ 0.000000] DMA zone: 32 pages used for memmap
    11:14:08 [ 0.000000] DMA zone: 0 pages reserved
    11:14:08 [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    11:14:08 [ 0.000000] Normal zone: 1744 pages used for memmap
    11:14:08 [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    11:14:08 [ 0.000000] HighMem zone: 4849 pages used for memmap
    11:14:08 [ 0.000000] HighMem zone: 615447 pages, LIFO batch:31
    11:14:08 [ 0.000000] Using APIC driver default
    11:14:08 [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    11:14:08 [ 0.000000] ACPI: Local APIC address 0xfee00000
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[
    11:14:08 [ 0.000000] initial memory mapped : 0 – 01c00000
    11:14:08 [ 0.000000] Base memory trampoline at [c009d000] 9d000 size 4096
    11:14:08 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    11:14:08 [ 0.000000] 0000000000 – 0000400000 page 4k
    11:14:08 [ 0.000000] 0000400000 – 0037400000 page 2M
    11:14:08 [ 0.000000] 0037400000 – 00377fe000 page 4k
    11:14:08 [ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01bf8000-0x01bfffff]
    11:14:08 [ 0.000000] RAMDISK: 372d6000 – 37963000
    11:14:08 [ 0.000000] Allocated new RAMDISK: 36c49000 – 372d5a0c
    11:14:08 [ 0.000000] Move RAMDISK from 00000000372d6000 – 0000000037962a0b to 36c49000 – 372d5a0b
    11:14:08 [ 0.000000] ACPI: RSDP 000f2390 00024 (v02 INTEL )
    11:14:08 [ 0.000000] ACPI: XSDT ceffe120 0004C (v01 INTEL D2500CC 00000025 01000013)
    11:14:08 [ 0.000000] ACPI: FACP ceff5000 000F4 (v03 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: DSDT ceff7000 06834 (v02 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: FACS cef95000 00040
    11:14:08 [ 0.000000] ACPI: SSDT ceff6000 0043E (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: APIC ceff4000 00084 (v02 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: MCFG ceff3000 0003C (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: HPET ceff2000 00038 (v01 INTEL D2500CC 00000025 MSFT 0100000D)
    11:14:08 [ 0.000000] ACPI: Local APIC address 0xfee00000
    11:14:08 [ 0.000000] 2424MB HIGHMEM available.
    11:14:08 [ 0.000000] 887MB LOWMEM available.
    11:14:08 [ 0.000000] mapped low ram: 0 – 377fe000
    11:14:08 [ 0.000000] low ram: 0 – 377fe000
    11:14:08 [ 0.000000] Zone PFN ranges:
    11:14:08 [ 0.000000] DMA 0x00000010 -> 0x00001000
    11:14:08 [ 0.000000] Normal 0x00001000 -> 0x000377fe
    11:14:08 [ 0.000000] HighMem 0x000377fe -> 0x000cf000
    11:14:08 [ 0.000000] Movable zone start PFN for each node
    11:14:08 [ 0.000000] Early memory PFN ranges
    11:14:08 [ 0.000000] 0: 0x00000010 -> 0x0000008f
    11:14:08 [ 0.000000] 0: 0x00000090 -> 0x0000009e
    11:14:08 [ 0.000000] 0: 0x00000100 -> 0x000cee98
    11:14:08 [ 0.000000] 0: 0x000ceebf -> 0x000ceefa
    11:14:08 [ 0.000000] 0: 0x000cefbf -> 0x000ceff1
    11:14:08 [ 0.000000] 0: 0x000cefff -> 0x000cf000
    11:14:08 [ 0.000000] On node 0 totalpages: 847507
    11:14:08 [ 0.000000] free_area_init_node: node 0, pgdat c1611e40, node_mem_map f5269200
    11:14:08 [ 0.000000] DMA zone: 32 pages used for memmap
    11:14:08 [ 0.000000] DMA zone: 0 pages reserved
    11:14:08 [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    11:14:08 [ 0.000000] Normal zone: 1744 pages used for memmap
    11:14:08 [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    11:14:08 [ 0.000000] HighMem zone: 4849 pages used for memmap
    11:14:08 [ 0.000000] HighMem zone: 615447 pages, LIFO batch:31
    11:14:08 [ 0.000000] Using APIC driver default
    11:14:08 [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    11:14:08 [ 0.000000] ACPI: Local APIC address 0xfee00000
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
    11:14:08 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
    11:14:08 [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    11:14:08 [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    11:14:08 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    11:14:08 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    11:14:08 [ 0.000000] ACPI: IRQ0 used by override.
    11:14:08 [ 0.000000] ACPI: IRQ2 used by override.
    11:14:08 [ 0.000000] ACPI: IRQ9 used by override.
    11:14:08 [ 0.000000] Using ACPI (MADT) for SMP configuration information
    11:14:08 [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    11:14:08 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    11:14:08 [ 0.000000] nr_irqs_gsi: 40
    11:14:08 [ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1be00000)
    11:14:08 [ 0.000000] Booting paravirtualized kernel on bare hardware
    11:14:08 [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
    11:14:08 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f77d1000 s30656 r0 d22592 u53248
    11:14:08 [ 0.000000] pcpu-alloc: s30656 r0 d22592 u53248 alloc=13*4096
    11:14:08 [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    11:14:08 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 840882
    11:14:08 [ 0.000000] Kernel command line: BOOT_IMAGE=/1/3.4.82-ZS/vmlinuz root=HD=ZS-A373ACBE_3.1.0_1 quiet
    11:14:08 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    11:14:08 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    11:14:08 [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    11:14:08 [ 0.000000] Initializing CPU#0
    11:14:08 [ 0.000000] Initializing HighMem for node 0 (000377fe:000cf000)
    11:14:08 [ 0.000000] Memory: 3348452k/3391488k available (4531k kernel code, 41576k reserved, 1715k data, 444k init, 2481184k highmem)
    11:14:08 [ 0.000000] virtual kernel memory layout:
    11:14:08 [ 0.000000] fixmap : 0xffd35000 – 0xfffff000 (2856 kB)
    11:14:08 [ 0.000000] pkmap : 0xff800000 – 0xffc00000 (4096 kB)
    11:14:08 [ 0.000000] vmalloc : 0xf7ffe000 – 0xff7fe000 ( 120 MB)
    11:14:08 [ 0.000000] lowmem : 0xc0000000 – 0xf77fe000 ( 887 MB)
    11:14:08 [ 0.000000] .init : 0xc161a000 – 0xc1689000 ( 444 kB)
    11:14:08 [ 0.000000] .data : 0xc146cdbc – 0xc1619b80 (1715 kB)
    11:14:08 [ 0.000000] .text : 0xc1000000 – 0xc146cdbc (4531 kB)
    11:14:08 [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
    11:14:08 [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    11:14:08 [ 0.000000] Hierarchical RCU implementation.
    11:14:08 [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    11:14:08 [ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
    11:14:08 [ 0.000000] Extended CMOS year: 2000
    11:14:08 [ 0.000000] Console: colour VGA+ 80×25
    11:14:08 [ 0.000000] console [tty0] enabled
    11:14:08 [ 0.000000] hpet clockevent registered
    11:14:08 [ 0.000000] Fast TSC calibration using PIT
    11:14:08 [ 0.004000] Detected 1866.615 MHz processor.
    11:14:08 [ 0.226875] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    11:14:08 [ 0.226881] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    11:14:08 [ 0.226886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    11:14:08 [ 0.226891] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    11:14:08 [ 0.226896] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    11:14:08 [ 0.226901] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    11:14:08 [ 0.226907] pci_bus 0000:00: root bus resource [mem 0xcf800000-0xcfffffff]
    11:14:08 [ 0.226912] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
    11:14:08 [ 0.226917] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    11:14:08 [ 0.226934] pci 0000:00:00.0: [8086:0bf5] type 00 class 0x060000
    11:14:08 [ 0.226993] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
    11:14:08 [ 0.227009] pci 0000:00:02.0: reg 10: [mem 0xd0400000-0xd04fffff]
    11:14:08 [ 0.227019] pci 0000:00:02.0: reg 14: [io 0x50d0-0x50d7]
    11:14:08 [ 0.227119] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
    11:14:08 [ 0.227143] pci 0000:00:1b.0: reg 10: [mem 0xd0600000-0xd0603fff 64bit]
    11:14:08 [ 0.227237] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.227269] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
    11:14:08 [ 0.227368] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.227402] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
    11:14:08 [ 0.227500] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.227534] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
    11:14:08 [ 0.227632] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.227668] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
    11:14:08 [ 0.227723] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
    11:14:08 [ 0.227769] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
    11:14:08 [ 0.227823] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
    11:14:08 [ 0.227869] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
    11:14:08 [ 0.227924] pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
    11:14:08 [ 0.227969] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
    11:14:08 [ 0.228024] pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
    11:14:08 [ 0.228080] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
    11:14:08 [ 0.228107] pci 0000:00:1d.7: reg 10: [mem 0xd0504400-0xd05047ff]
    11:14:08 [ 0.228213] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.228243] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    11:14:08 [ 0.228336] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
    11:14:08 [ 0.228433] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
    11:14:08 [ 0.228495] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
    11:14:08 [ 0.228518] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
    11:14:08 [ 0.228532] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
    11:14:08 [ 0.228545] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
    11:14:08 [ 0.228558] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
    11:14:08 [ 0.228571] pci 0000:00:1f.2: reg 20: [io 0x5020-0x502f]
    11:14:08 [ 0.228584] pci 0000:00:1f.2: reg 24: [mem 0xd0504000-0xd05043ff]
    11:14:08 [ 0.228636] pci 0000:00:1f.2: PME# supported from D3hot
    11:14:08 [ 0.228663] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
    11:14:08 [ 0.228728] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
    11:14:08 [ 0.228861] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
    11:14:08 [ 0.228892] pci 0000:02:00.0: reg 10: [mem 0xd0320000-0xd033ffff]
    11:14:08 [ 0.228916] pci 0000:02:00.0: reg 14: [mem 0xd0300000-0xd031ffff]
    11:14:08 [ 0.228938] pci 0000:02:00.0: reg 18: [io 0x4000-0x401f]
    11:14:08 [ 0.228961] pci 0000:02:00.0: reg 1c: [mem 0xd0340000-0xd0343fff]
    11:14:08 [ 0.229125] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.234861] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    11:14:08 [ 0.234871] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    11:14:08 [ 0.234878] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff]
    11:14:08 [ 0.234978] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000
    11:14:08 [ 0.235010] pci 0000:01:00.0: reg 10: [mem 0xd0220000-0xd023ffff]
    11:14:08 [ 0.235033] pci 0000:01:00.0: reg 14: [mem 0xd0200000-0xd021ffff]
    11:14:08 [ 0.235056] pci 0000:01:00.0: reg 18: [io 0x3000-0x301f]
    11:14:08 [ 0.235079] pci 0000:01:00.0: reg 1c: [mem 0xd0240000-0xd0243fff]
    11:14:08 [ 0.235243] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    11:14:08 [ 0.242852] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
    11:14:08 [ 0.242860] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    11:14:08 [ 0.242868] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd02fffff]
    11:14:08 [ 0.242961] pci 0000:03:00.0: [12d8:a303] type 01 class 0x060400
    11:14:08 [ 0.243113] pci 0000:03:00.0: supports D1 D2
    11:14:08 [ 0.243118] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    11:14:08 [ 0.250838] pci 0000:00:1c.2: PCI bridge to [bus 03-06]
    11:14:08 [ 0.250846] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
    11:14:08 [ 0.250859] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.250988] pci 0000:04:01.0: [12d8:a303] type 01 class 0x060400
    11:14:08 [ 0.251133] pci 0000:04:01.0: supports D1 D2
    11:14:08 [ 0.251137] pci 0000:04:01.0: PME# supported from D0 D1 D2 D3hot D3cold
    11:14:08 [ 0.251198] pci 0000:04:02.0: [12d8:a303] type 01 class 0x060400
    11:14:08 [ 0.251341] pci 0000:04:02.0: supports D1 D2
    11:14:08 [ 0.251346] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    11:14:08 [ 0.251427] pci 0000:03:00.0: PCI bridge to [bus 04-06]
    11:14:08 [ 0.251438] pci 0000:03:00.0: bridge window [io 0x1000-0x2fff]
    11:14:08 [ 0.251454] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.251580] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
    11:14:08 [ 0.251609] pci 0000:05:00.0: reg 10: [io 0x2000-0x20ff]
    11:14:08 [ 0.251655] pci 0000:05:00.0: reg 18: [mem 0xd0104000-0xd0104fff 64bit pref]
    11:14:08 [ 0.251685] pci 0000:05:00.0: reg 20: [mem 0xd0100000-0xd0103fff 64bit pref]
    11:14:08 [ 0.251803] pci 0000:05:00.0: supports D1 D2
    11:14:08 [ 0.251807] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    11:14:08 [ 0.258838] pci 0000:04:01.0: PCI bridge to [bus 05-05]
    11:14:08 [ 0.258850] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]
    11:14:08 [ 0.258866] pci 0000:04:01.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
    11:14:08 [ 0.258996] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    11:14:08 [ 0.259026] pci 0000:06:00.0: reg 10: [io 0x1000-0x10ff]
    11:14:08 [ 0.259071] pci 0000:06:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    11:14:08 [ 0.259101] pci 0000:06:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    11:14:08 [ 0.259220] pci 0000:06:00.0: supports D1 D2
    11:14:08 [ 0.259224] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    11:14:08 [ 0.266830] pci 0000:04:02.0: PCI bridge to [bus 06-06]
    11:14:08 [ 0.266842] pci 0000:04:02.0: bridge window [io 0x1000-0x1fff]
    11:14:08 [ 0.266858] pci 0000:04:02.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    11:14:08 [ 0.266967] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
    11:14:08 [ 0.266983] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    11:14:08 [ 0.266988] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    11:14:08 [ 0.266994] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    11:14:08 [ 0.267000] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    11:14:08 [ 0.267005] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    11:14:08 [ 0.267011] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    11:14:08 [ 0.267017] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xcfffffff] (subtractive decode)
    11:14:08 [ 0.267023] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
    11:14:08 [ 0.267029] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
    11:14:08 [ 0.267057] pci_bus 0000:00: on NUMA node 0
    11:14:08 [ 0.267064] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    11:14:08 [ 0.267192] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
    11:14:08 [ 0.267418] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP01._PRT]
    11:14:08 [ 0.267490] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP02._PRT]
    11:14:08 [ 0.267562] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.RP03._PRT]
    11:14:08 [ 0.267737] _SB_.PCI0:_OSC invalid UUID
    11:14:08 [ 0.267741] _OSC request data:1 1f 0
    11:14:08 [ 0.267750] pci0000:00: Requesting ACPI _OSC control (0x1d)
    11:14:08 [ 0.267830] _SB_.PCI0:_OSC invalid UUID
    11:14:08 [ 0.267834] _OSC request data:1 0 1d
    11:14:08 [ 0.267842] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    11:14:08 [ 0.267846] ACPI _OSC control for PCIe not granted, disabling ASPM
    11:14:08 [ 0.276030] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    11:14:08 [ 0.276140] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    11:14:08 [ 0.276248] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    11:14:08 [ 0.276351] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    11:14:08 [ 0.276458] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    11:14:08 [ 0.276565] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    11:14:08 [ 0.276669] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
    11:14:08 [ 0.276773] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
    11:14:08 [ 0.277147] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    11:14:08 [ 0.277165] vgaarb: loaded
    11:14:08 [ 0.277168] vgaarb: bridge control possible 0000:00:02.0
    11:14:08 [ 0.277507] SCSI subsystem initialized
    11:14:08 [ 0.277744] libata version 3.00 loaded.
    11:14:08 [ 0.278168] usbcore: registered new interface driver usbfs
    11:14:08 [ 0.278255] usbcore: registered new interface driver hub
    11:14:08 [ 0.278360] usbcore: registered new device driver usb
    11:14:08 [ 0.278815] PCI: Using ACPI for IRQ routing
    11:14:08 [ 0.280676] PCI: pci_cache_line_size set to 64 bytes
    11:14:08 [ 0.280793] reserve RAM buffer: 000000000008f000 – 000000000008ffff
    11:14:08 [ 0.280799] reserve RAM buffer: 000000000009e800 – 000000000009ffff
    11:14:08 [ 0.280803] reserve RAM buffer: 00000000cee98000 – 00000000cfffffff
    11:14:08 [ 0.280808] reserve RAM buffer: 00000000ceefa000 – 00000000cfffffff
    11:14:08 [ 0.280813] reserve RAM buffer: 00000000ceff1000 – 00000000cfffffff
    11:14:08 [ 0.280820] reserve RAM buffer: 00000000cf000000 – 00000000cfffffff
    11:14:08 [ 0.281217] NetLabel: Initializing
    11:14:08 [ 0.281222] NetLabel: domain hash size = 128
    11:14:08 [ 0.281225] NetLabel: protocols = UNLABELED CIPSOv4
    11:14:08 [ 0.281246] NetLabel: unlabeled traffic allowed by default
    11:14:08 [ 0.281302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    11:14:08 [ 0.281312] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    11:14:08 [ 0.283349] Switching to clocksource hpet
    11:14:08 [ 0.286475] pnp: PnP ACPI init
    11:14:08 [ 0.286493] ACPI: bus type pnp registered
    11:14:08 [ 0.286848] pnp 00:00: [bus 00-ff]
    11:14:08 [ 0.286855] pnp 00:00: [io 0x0000-0x0cf7 window]
    11:14:08 [ 0.286860] pnp 00:00: [io 0x0cf8-0x0cff]
    11:14:08 [ 0.286865] pnp 00:00: [io 0x0d00-0xffff window]
    11:14:08 [ 0.286870] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    11:14:08 [ 0.286875] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    11:14:08 [ 0.286880] pnp 00:00: [mem 0x000e0000-0x000effff window]
    11:14:08 [ 0.286885] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    11:14:08 [ 0.286890] pnp 00:00: [mem 0xcf800000-0xcfffffff window]
    11:14:08 [ 0.286895] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
    11:14:08 [ 0.286899] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    11:14:08 [ 0.287070] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    11:14:08 [ 0.287113] pnp 00:01: [io 0x0000-0x001f]
    11:14:08 [ 0.287118] pnp 00:01: [io 0x0081-0x0091]
    11:14:08 [ 0.287122] pnp 00:01: [io 0x0093-0x009f]
    11:14:08 [ 0.287127] pnp 00:01: [io 0x00c0-0x00df]
    11:14:08 [ 0.287131] pnp 00:01: [dma 4]
    11:14:08 [ 0.287231] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    11:14:08 [ 0.287252] pnp 00:02: [mem 0xff000000-0xffffffff]
    11:14:08 [ 0.287351] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    11:14:08 [ 0.287514] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    11:14:08 [ 0.287652] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
    11:14:08 [ 0.287660] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    11:14:08 [ 0.287686] pnp 00:04: [io 0x00f0]
    11:14:08 [ 0.287705] pnp 00:04: [irq 13]
    11:14:08 [ 0.287803] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    11:14:08 [ 0.287831] pnp 00:05: [io 0x002e-0x002f]
    11:14:08 [ 0.287836] pnp 00:05: [io 0x004e-0x004f]
    11:14:08 [ 0.287840] pnp 00:05: [io 0x0061]
    11:14:08 [ 0.287844] pnp 00:05: [io 0x0063]
    11:14:08 [ 0.287848] pnp 00:05: [io 0x0065]
    11:14:08 [ 0.287852] pnp 00:05: [io 0x0067]
    11:14:08 [ 0.287856] pnp 00:05: [io 0x0070]
    11:14:08 [ 0.287860] pnp 00:05: [io 0x0080]
    11:14:08 [ 0.287863] pnp 00:05: [io 0x0092]
    11:14:08 [ 0.287867] pnp 00:05: [io 0x00b2-0x00b3]
    11:14:08 [ 0.287872] pnp 00:05: [io 0x0680-0x069f]
    11:14:08 [ 0.287876] pnp 00:05: [io 0xffff]
    11:14:08 [ 0.287880] pnp 00:05: [io 0xffff]
    11:14:08 [ 0.287884] pnp 00:05: [io 0xffff]
    11:14:08 [ 0.287888] pnp 00:05: [io 0x0400-0x047f]
    11:14:08 [ 0.287892] pnp 00:05: [io 0x0500-0x057f]
    11:14:08 [ 0.287897] pnp 00:05: [io 0x0600-0x061f]
    11:14:08 [ 0.288045] system 00:05: [io 0x0680-0x069f] has been reserved
    11:14:08 [ 0.288052] system 00:05: [io 0xffff] has been reserved
    11:14:08 [ 0.288057] system 00:05: [io 0xffff] has been reserved
    11:14:08 [ 0.288062] system 00:05: [io 0xffff] has been reserved
    11:14:08 [ 0.288068] system 00:05: [io 0x0400-0x047f] has been reserved
    11:14:08 [ 0.288073] system 00:05: [io 0x0500-0x057f] has been reserved
    11:14:08 [ 0.288079] system 00:05: [io 0x0600-0x061f] has been reserved
    11:14:08 [ 0.288085] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    11:14:08 [ 0.288143] pnp 00:06: [io 0x06a0-0x06af]
    11:14:08 [ 0.288148] pnp 00:06: [io 0x06b0-0x06ff]
    11:14:08 [ 0.288274] system 00:06: [io 0x06a0-0x06af] has been reserved
    11:14:08 [ 0.288280] system 00:06: [io 0x06b0-0x06ff] has been reserved
    11:14:08 [ 0.288287] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    11:14:08 [ 0.288312] pnp 00:07: [io 0x0070-0x0077]
    11:14:08 [ 0.288324] pnp 00:07: [irq 8]
    11:14:08 [ 0.288426] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    11:14:08 [ 0.288741] pnp 00:08: [io 0x0378-0x037f]
    11:14:08 [ 0.288754] pnp 00:08: [irq 7]
    11:14:08 [ 0.288929] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
    11:14:08 [ 0.289247] pnp 00:09: [io 0x03f8-0x03ff]
    11:14:08 [ 0.289254] pnp 00:09: IRQ 3 override to edge, high
    11:14:08 [ 0.289264] pnp 00:09: [irq 3]
    11:14:08 [ 0.289434] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    11:14:08 [ 0.289684] pnp 00:0a: [io 0x02f8-0x02ff]
    11:14:08 [ 0.289690] pnp 00:0a: IRQ 4 override to edge, high
    11:14:08 [ 0.289701] pnp 00:0a: [irq 4]
    11:14:08 [ 0.289865] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
    11:14:08 [ 0.290131] pnp 00:0b: [io 0x02e8-0x02ef]
    11:14:08 [ 0.290137] pnp 00:0b: IRQ 3 override to edge, high
    11:14:08 [ 0.290142] pnp 00:0b: [irq 3]
    11:14:08 [ 0.290306] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
    11:14:08 [ 0.290569] pnp 00:0c: [io 0x02e0-0x02e7]
    11:14:08 [ 0.290575] pnp 00:0c: IRQ 4 override to edge, high
    11:14:08 [ 0.290580] pnp 00:0c: [irq 4]
    11:14:08 [ 0.290744] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
    11:14:08 [ 0.290996] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
    11:14:08 [ 0.291001] pnp 00:0d: [mem 0x00000000-0x00003fff]
    11:14:08 [ 0.291006] pnp 00:0d: [mem 0x00000000-0x00000fff]
    11:14:08 [ 0.291011] pnp 00:0d: [mem 0x00000000-0x00000fff]
    11:14:08 [ 0.291016] pnp 00:0d: [mem 0x00000000-0xffffffff disabled]
    11:14:08 [ 0.291021] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
    11:14:08 [ 0.291185] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
    11:14:08 [ 0.291192] system 00:0d: [mem 0x00000000-0x00003fff] could not be reserved
    11:14:08 [ 0.291198] system 00:0d: [mem 0x00000000-0x00000fff] could not be reserved
    11:14:08 [ 0.291204] system 00:0d: [mem 0x00000000-0x00000fff] could not be reserved
    11:14:08 [ 0.291210] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    11:14:08 [ 0.291217] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    11:14:08 [ 0.291488] pnp: PnP ACPI: found 14 devices
    11:14:08 [ 0.291493] ACPI: ACPI bus type pnp unregistered
    11:14:08 [ 0.334882] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
    11:14:08 [ 0.334901] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
    11:14:08 [ 0.334951] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03-06] add_size 400000
    11:14:08 [ 0.334971] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    11:14:08 [ 0.334978] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    11:14:08 [ 0.334985] pci 0000:00:1c.2: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    11:14:08 [ 0.334998] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0700000-0xd08fffff 64bit pref]
    11:14:08 [ 0.335007] pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
    11:14:08 [ 0.335015] pci 0000:00:1c.2: BAR 8: assigned [mem 0xd0b00000-0xd0efffff]
    11:14:08 [ 0.335021] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    11:14:08 [ 0.335028] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    11:14:08 [ 0.335037] pci 0000:00:1c.0: bridge window [mem 0xd0300000-0xd03fffff]
    11:14:08 [ 0.335045] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff 64bit pref]
    11:14:08 [ 0.335055] pci 0000:00:1c.1: PCI bridge to [bus 01-01]
    11:14:08 [ 0.335061] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
    11:14:08 [ 0.335070] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd02fffff]
    11:14:08 [ 0.335078] pci 0000:00:1c.1: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
    11:14:08 [ 0.335089] pci 0000:04:01.0: PCI bridge to [bus 05-05]
    11:14:08 [ 0.335095] pci 0000:04:01.0: bridge window [io 0x2000-0x2fff]
    11:14:08 [ 0.335109] pci 0000:04:01.0: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335121] pci 0000:04:02.0: PCI bridge to [bus 06-06]
    11:14:08 [ 0.335127] pci 0000:04:02.0: bridge window [io 0x1000-0x1fff]
    11:14:08 [ 0.335142] pci 0000:04:02.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    11:14:08 [ 0.335153] pci 0000:03:00.0: PCI bridge to [bus 04-06]
    11:14:08 [ 0.335160] pci 0000:03:00.0: bridge window [io 0x1000-0x2fff]
    11:14:08 [ 0.335173] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335185] pci 0000:00:1c.2: PCI bridge to [bus 03-06]
    11:14:08 [ 0.335191] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
    11:14:08 [ 0.335200] pci 0000:00:1c.2: bridge window [mem 0xd0b00000-0xd0efffff]
    11:14:08 [ 0.335208] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335218] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
    11:14:08 [ 0.335324] pci 0000:00:1e.0: setting latency timer to 64
    11:14:08 [ 0.335334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    11:14:08 [ 0.335339] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    11:14:08 [ 0.335344] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    11:14:08 [ 0.335349] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    11:14:08 [ 0.335354] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
    11:14:08 [ 0.335359] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
    11:14:08 [ 0.335365] pci_bus 0000:00: resource 10 [mem 0xcf800000-0xcfffffff]
    11:14:08 [ 0.335370] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfebfffff]
    11:14:08 [ 0.335375] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
    11:14:08 [ 0.335380] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    11:14:08 [ 0.335385] pci_bus 0000:02: resource 1 [mem 0xd0300000-0xd03fffff]
    11:14:08 [ 0.335391] pci_bus 0000:02: resource 2 [mem 0xd0700000-0xd08fffff 64bit pref]
    11:14:08 [ 0.335396] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    11:14:08 [ 0.335401] pci_bus 0000:01: resource 1 [mem 0xd0200000-0xd02fffff]
    11:14:08 [ 0.335407] pci_bus 0000:01: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
    11:14:08 [ 0.335412] pci_bus 0000:03: resource 0 [io 0x1000-0x2fff]
    11:14:08 [ 0.335417] pci_bus 0000:03: resource 1 [mem 0xd0b00000-0xd0efffff]
    11:14:08 [ 0.335422] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335428] pci_bus 0000:04: resource 0 [io 0x1000-0x2fff]
    11:14:08 [ 0.335433] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335438] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
    11:14:08 [ 0.335444] pci_bus 0000:05: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref]
    11:14:08 [ 0.335449] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
    11:14:08 [ 0.335454] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    11:14:08 [ 0.335460] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
    11:14:08 [ 0.335465] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
    11:14:08 [ 0.335470] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
    11:14:08 [ 0.335475] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
    11:14:08 [ 0.335480] pci_bus 0000:07: resource 8 [mem 0x000e0000-0x000effff]
    11:14:08 [ 0.335485] pci_bus 0000:07: resource 9 [mem 0x000f0000-0x000fffff]
    11:14:08 [ 0.335490] pci_bus 0000:07: resource 10 [mem 0xcf800000-0xcfffffff]
    11:14:08 [ 0.335496] pci_bus 0000:07: resource 11 [mem 0xd0000000-0xfebfffff]
    11:14:08 [ 0.335501] pci_bus 0000:07: resource 12 [mem 0xfed40000-0xfed44fff]
    11:14:08 [ 0.335580] NET: Registered protocol family 2
    11:14:08 [ 0.335684] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    11:14:08 [ 0.336004] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    11:14:08 [ 0.336864] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    11:14:08 [ 0.337258] TCP: Hash tables configured (established 131072 bind 65536)
    11:14:08 [ 0.337263] TCP: reno registered
    11:14:08 [ 0.337271] UDP hash table entries: 512 (order: 2, 16384 bytes)
    11:14:08 [ 0.337287] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    11:14:08 [ 0.337438] NET: Registered protocol family 1
    11:14:08 [ 0.337646] RPC: Registered named UNIX socket transport module.
    11:14:08 [ 0.337651] RPC: Registered udp transport module.
    11:14:08 [ 0.337655] RPC: Registered tcp transport module.
    11:14:08 [ 0.337658] RPC: Registered tcp NFSv4.1 backchannel transport module.
    11:14:08 [ 0.337680] pci 0000:00:02.0: Boot video device
    11:14:08 [ 0.337732] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0004
    11:14:08 [ 0.337736] pci 0000:00:1d.0: Performing full reset
    11:14:08 [ 0.337776] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0004
    11:14:08 [ 0.337780] pci 0000:00:1d.1: Performing full reset
    11:14:08 [ 0.337809] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0004
    11:14:08 [ 0.337814] pci 0000:00:1d.2: Performing full reset
    11:14:08 [ 0.337844] pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0004
    11:14:08 [ 0.337848] pci 0000:00:1d.3: Performing full reset
    11:14:08 [ 0.337950] PCI: CLS 64 bytes, default 64
    11:14:08 [ 0.338037] Trying to unpack rootfs image as initramfs…
    11:14:08 [ 0.613601] Freeing initrd memory: 6708k freed
    11:14:08 [ 0.620296] microcode: CPU0 sig=0x30661, pf=0x4, revision=0x10d
    11:14:08 [ 0.620315] microcode: CPU1 sig=0x30661, pf=0x4, revision=0x10d
    11:14:08 [ 0.620423] microcode: Microcode Update Driver: v2.00 , Peter Oruba
    11:14:08 [ 0.645074] highmem bounce pool size: 64 pages
    11:14:08 [ 0.645084] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    11:14:08 [ 0.651700] VFS: Disk quotas dquot_6.5.2
    11:14:08 [ 0.651856] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    11:14:08 [ 0.652744] NFS: Registering the id_resolver key type
    11:14:08 [ 0.653076] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
    11:14:08 [ 0.653320] msgmni has been set to 1707
    11:14:08 [ 0.654148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    11:14:08 [ 0.654155] io scheduler noop registered
    11:14:08 [ 0.654160] io scheduler deadline registered
    11:14:08 [ 0.654172] io scheduler cfq registered (default)
    11:14:08 [ 0.654586] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    11:14:08 [ 0.654792] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    11:14:08 [ 0.654984] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    11:14:08 [ 0.655854] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    11:14:08 [ 0.655865] ACPI: Power Button [PWRB]
    11:14:08 [ 0.655999] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
    11:14:08 [ 0.656007] ACPI: Sleep Button [SLPB]
    11:14:08 [ 0.656138] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    11:14:08 [ 0.656146] ACPI: Power Button [PWRF]
    11:14:08 [ 0.699916] kworker/u:1 used greatest stack depth: 7028 bytes left
    11:14:08 [ 0.710906] r3964: Philips r3964 Driver $Revision: 1.10 $
    11:14:08 [ 0.710913] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    11:14:08 [ 0.986797] serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
    11:14:08 [ 1.262524] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
    11:14:08 [ 1.538243] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
    11:14:08 [ 1.559167] 00:09: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
    11:14:08 [ 1.579839] 00:0a: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
    11:14:08 [ 1.600516] 00:0b: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
    11:14:08 [ 1.614042] Refined TSC clocksource calibration: 1866.732 MHz.
    11:14:08 [ 1.614053] Switching to clocksource tsc
    11:14:08 [ 1.621196] 00:0c: ttyS2 at I/O 0x2e0 (irq = 4) is a 16550A
    11:14:08 [ 1.622121] Non-volatile memory driver v1.3
    11:14:08 [ 1.622128] nsc_gpio initializing
    11:14:08 [ 1.622132] Linux agpgart interface v0.103
    11:14:08 [ 1.626324] brd: module loaded
    11:14:08 [ 1.628444] loop: module loaded
    11:14:08 [ 1.629091] ahci 0000:00:1f.2: version 3.0
    11:14:08 [ 1.629180] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    11:14:08 [ 1.629241] ahci: SSS flag set, parallel bus scan disabled
    11:14:08 [ 1.629280] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    11:14:08 [ 1.629288] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
    11:14:08 [ 1.629296] ahci 0000:00:1f.2: setting latency timer to 64
    11:14:08 [ 1.630758] scsi0 : ahci
    11:14:08 [ 1.630994] scsi1 : ahci
    11:14:08 [ 1.631204] scsi2 : ahci
    11:14:08 [ 1.631423] scsi3 : ahci
    11:14:08 [ 1.631617] ata1: SATA max UDMA/133 abar m1024@0xd0504000 port 0xd0504100 irq 43
    11:14:08 [ 1.631625] ata2: SATA max UDMA/133 abar m1024@0xd0504000 port 0xd0504180 irq 43
    11:14:08 [ 1.631629] ata3: DUMMY
    11:14:08 [ 1.631632] ata4: DUMMY
    11:14:08 [ 1.632499] Fixed MDIO Bus: probed
    11:14:08 [ 1.632677] Initializing USB Mass Storage driver…
    11:14:08 [ 1.632764] usbcore: registered new interface driver usb-storage
    11:14:08 [ 1.632768] USB Mass Storage support registered.
    11:14:08 [ 1.632850] usbcore: registered new interface driver libusual
    11:14:08 [ 1.632932] usbcore: registered new interface driver ldusb
    11:14:08 [ 1.633259] i8042: PNP: No PS/2 controller found. Probing ports directly.
    11:14:08 [ 1.635745] serio: i8042 KBD port at 0x60,0x64 irq 1
    11:14:08 [ 1.635759] serio: i8042 AUX port at 0x60,0x64 irq 12
    11:14:08 [ 1.636121] mousedev: PS/2 mouse device common for all mice
    11:14:08 [ 1.636581] rtc_cmos 00:07: RTC can wake from S4
    11:14:08 [ 1.636812] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    11:14:08 [ 1.636854] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    11:14:08 [ 1.637295] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
    11:14:08 [ 1.637420] cpuidle: using governor ladder
    11:14:08 [ 1.637424] cpuidle: using governor menu
    11:14:08 [ 1.637428] EFI Variables Facility v0.08 2004-May-17
    11:14:08 [ 1.637630] Netfilter messages via NETLINK v0.30.
    11:14:08 [ 1.637658] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    11:14:08 [ 1.638054] ip_set: protocol 6
    11:14:08 [ 1.638064] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
    11:14:08 [ 1.638092] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
    11:14:08 [ 1.638171] IPVS: Creating netns size=1220 id=0
    11:14:08 [ 1.638189] IPVS: ipvs loaded.
    11:14:08 [ 1.638351] Initializing XFRM netlink socket
    11:14:08 [ 1.638823] NET: Registered protocol family 10
    11:14:08 [ 1.639185] IPv6 over IPv4 tunneling driver
    11:14:08 [ 1.639604] NET: Registered protocol family 17
    11:14:08 [ 1.639653] NET: Registered protocol family 33
    11:14:08 [ 1.639675] NET: Registered protocol family 37
    11:14:08 [ 1.639679] Registering the dns_resolver key type
    11:14:08 [ 1.639757] Using IPI Shortcut mode
    11:14:08 [ 1.640700] console [netcon0] enabled
    11:14:08 [ 1.640704] netconsole: network logging started
    11:14:08 [ 1.640815] Initializing network drop monitor service
    11:14:08 [ 1.949712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    11:14:08 [ 1.949849] ata1.00: ATA-9: DeLOCK 54589 8GB, S130604, max UDMA/133
    11:14:08 [ 1.949856] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    11:14:08 [ 1.950014] ata1.00: configured for UDMA/133
    11:14:08 [ 1.950202] scsi 0:0:0:0: Direct-Access ATA DeLOCK 54589 8GB S130 PQ: 0 ANSI: 5
    11:14:08 [ 1.950637] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
    11:14:08 [ 1.950755] sd 0:0:0:0: [sda] Write Protect is off
    11:14:08 [ 1.950761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    11:14:08 [ 1.950812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
    11:14:08 [ 1.951152] sd 0:0:0:0: Attached scsi generic sg0 type 0
    11:14:08 [ 1.951560] sda: sda1 sda2 sda3 sda4
    11:14:08 [ 1.952478] sd 0:0:0:0: [sda] Attached SCSI disk
    11:14:08 [ 2.269385] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    11:14:08 [ 2.269630] ata2.00: ATA-7: INTEL SSDSA2M160G2GC, 2CV102HD, max UDMA/133
    11:14:08 [ 2.269637] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    11:14:08 [ 2.269919] ata2.00: configured for UDMA/133
    11:14:08 [ 2.270110] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSA2M160 2CV1 PQ: 0 ANSI: 5
    11:14:08 [ 2.270578] sd 1:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    11:14:08 [ 2.270727] sd 1:0:0:0: Attached scsi generic sg1 type 0
    11:14:08 [ 2.270770] sd 1:0:0:0: [sdb] Write Protect is off
    11:14:08 [ 2.270777] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    11:14:08 [ 2.270864] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
    11:14:08 [ 2.271606] sdb: sdb1
    11:14:08 [ 2.272188] sd 1:0:0:0: [sdb] Attached SCSI disk
    11:14:08 [ 2.272230] Freeing unused kernel memory: 444k freed
    11:14:08 [ 2.272438] Write protecting the kernel text: 4532k
    11:14:08 [ 2.272485] Write protecting the kernel read-only data: 1420k
    11:14:08 [ 2.292489] udevd[1281]: starting version 181
    11:14:08 [ 2.368719] uhci_hcd: USB Universal Host Controller Interface driver
    11:14:08 [ 2.368793] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    11:14:08 [ 2.368800] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    11:14:08 [ 2.368844] drivers/usb/core/inode.c: creating file ‘devices’
    11:14:08 [ 2.368851] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.368859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    11:14:08 [ 2.368874] uhci_hcd 0000:00:1d.0: detected 2 ports
    11:14:08 [ 2.368882] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
    11:14:08 [ 2.368886] uhci_hcd 0000:00:1d.0: Performing full reset
    11:14:08 [ 2.368906] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
    11:14:08 [ 2.368945] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
    11:14:08 [ 2.369017] usb usb1: default language 0x0409
    11:14:08 [ 2.369029] usb usb1: udev 1, busnum 1, minor = 0
    11:14:08 [ 2.369034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    11:14:08 [ 2.369039] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:14:08 [ 2.369044] usb usb1: Product: UHCI Host Controller
    11:14:08 [ 2.369048] usb usb1: Manufacturer: Linux 3.4.82-ZS uhci_hcd
    11:14:08 [ 2.369052] usb usb1: SerialNumber: 0000:00:1d.0
    11:14:08 [ 2.369327] usb usb1: usb_probe_device
    11:14:08 [ 2.369334] usb usb1: configuration #1 chosen from 1 choice
    11:14:08 [ 2.369349] usb usb1: adding 1-0:1.0 (config #1, interface 0)
    11:14:08 [ 2.369461] hub 1-0:1.0: usb_probe_interface
    11:14:08 [ 2.369466] hub 1-0:1.0: usb_probe_interface – got id
    11:14:08 [ 2.369472] hub 1-0:1.0: USB hub found
    11:14:08 [ 2.369481] hub 1-0:1.0: 2 ports detected
    11:14:08 [ 2.369485] hub 1-0:1.0: standalone hub
    11:14:08 [ 2.369489] hub 1-0:1.0: no power switching (usb 1.0)
    11:14:08 [ 2.369493] hub 1-0:1.0: individual port over-current protection
    11:14:08 [ 2.369498] hub 1-0:1.0: power on to power good time: 2ms
    11:14:08 [ 2.369505] hub 1-0:1.0: local power source is good
    11:14:08 [ 2.369510] hub 1-0:1.0: trying to enable port power on non-switchable hub
    11:14:08 [ 2.369542] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.369616] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    11:14:08 [ 2.369622] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    11:14:08 [ 2.369633] drivers/usb/core/inode.c: creating file ‘002’
    11:14:08 [ 2.369640] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    11:14:08 [ 2.369652] uhci_hcd 0000:00:1d.1: detected 2 ports
    11:14:08 [ 2.369662] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
    11:14:08 [ 2.369666] uhci_hcd 0000:00:1d.1: Performing full reset
    11:14:08 [ 2.369685] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
    11:14:08 [ 2.369718] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
    11:14:08 [ 2.369788] usb usb2: default language 0x0409
    11:14:08 [ 2.369800] usb usb2: udev 1, busnum 2, minor = 128
    11:14:08 [ 2.369804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
    11:14:08 [ 2.369810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:14:08 [ 2.369814] usb usb2: Product: UHCI Host Controller
    11:14:08 [ 2.369819] usb usb2: Manufacturer: Linux 3.4.82-ZS uhci_hcd
    11:14:08 [ 2.369823] usb usb2: SerialNumber: 0000:00:1d.1
    11:14:08 [ 2.370109] usb usb2: usb_probe_device
    11:14:08 [ 2.370116] usb usb2: configuration #1 chosen from 1 choice
    11:14:08 [ 2.370129] usb usb2: adding 2-0:1.0 (config #1, interface 0)
    11:14:08 [ 2.370239] hub 2-0:1.0: usb_probe_interface
    11:14:08 [ 2.370245] hub 2-0:1.0: usb_probe_interface – got id
    11:14:08 [ 2.370248] hub 2-0:1.0: USB hub found
    11:14:08 [ 2.370257] hub 2-0:1.0: 2 ports detected
    11:14:08 [ 2.370261] hub 2-0:1.0: standalone hub
    11:14:08 [ 2.370265] hub 2-0:1.0: no power switching (usb 1.0)
    11:14:08 [ 2.370269] hub 2-0:1.0: individual port over-current protection
    11:14:08 [ 2.370273] hub 2-0:1.0: power on to power good time: 2ms
    11:14:08 [ 2.370281] hub 2-0:1.0: local power source is good
    11:14:08 [ 2.370285] hub 2-0:1.0: trying to enable port power on non-switchable hub
    11:14:08 [ 2.370315] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.370380] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    11:14:08 [ 2.370386] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    11:14:08 [ 2.370397] drivers/usb/core/inode.c: creating file ‘003’
    11:14:08 [ 2.370405] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    11:14:08 [ 2.370420] uhci_hcd 0000:00:1d.2: detected 2 ports
    11:14:08 [ 2.370428] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
    11:14:08 [ 2.370432] uhci_hcd 0000:00:1d.2: Performing full reset
    11:14:08 [ 2.370450] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
    11:14:08 [ 2.370477] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
    11:14:08 [ 2.370542] usb usb3: default language 0x0409
    11:14:08 [ 2.370554] usb usb3: udev 1, busnum 3, minor = 256
    11:14:08 [ 2.370559] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
    11:14:08 [ 2.370564] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:14:08 [ 2.370569] usb usb3: Product: UHCI Host Controller
    11:14:08 [ 2.370574] usb usb3: Manufacturer: Linux 3.4.82-ZS uhci_hcd
    11:14:08 [ 2.370578] usb usb3: SerialNumber: 0000:00:1d.2
    11:14:08 [ 2.372116] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
    11:14:08 [ 2.372123] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
    11:14:08 [ 2.372129] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
    11:14:08 [ 2.374550] usb usb3: usb_probe_device
    11:14:08 [ 2.374560] usb usb3: configuration #1 chosen from 1 choice
    11:14:08 [ 2.374579] usb usb3: adding 3-0:1.0 (config #1, interface 0)
    11:14:08 [ 2.375314] hub 3-0:1.0: usb_probe_interface
    11:14:08 [ 2.375320] hub 3-0:1.0: usb_probe_interface – got id
    11:14:08 [ 2.375325] hub 3-0:1.0: USB hub found
    11:14:08 [ 2.375343] hub 3-0:1.0: 2 ports detected
    11:14:08 [ 2.375348] hub 3-0:1.0: standalone hub
    11:14:08 [ 2.375351] hub 3-0:1.0: no power switching (usb 1.0)
    11:14:08 [ 2.375356] hub 3-0:1.0: individual port over-current protection
    11:14:08 [ 2.375360] hub 3-0:1.0: power on to power good time: 2ms
    11:14:08 [ 2.375368] hub 3-0:1.0: local power source is good
    11:14:08 [ 2.375373] hub 3-0:1.0: trying to enable port power on non-switchable hub
    11:14:08 [ 2.375411] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.375486] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    11:14:08 [ 2.375493] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    11:14:08 [ 2.375503] drivers/usb/core/inode.c: creating file ‘004’
    11:14:08 [ 2.375511] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    11:14:08 [ 2.375523] uhci_hcd 0000:00:1d.3: detected 2 ports
    11:14:08 [ 2.375531] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
    11:14:08 [ 2.375535] uhci_hcd 0000:00:1d.3: Performing full reset
    11:14:08 [ 2.375552] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
    11:14:08 [ 2.375584] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
    11:14:08 [ 2.375648] usb usb4: default language 0x0409
    11:14:08 [ 2.375660] usb usb4: udev 1, busnum 4, minor = 384
    11:14:08 [ 2.375665] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    11:14:08 [ 2.375670] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:14:08 [ 2.375675] usb usb4: Product: UHCI Host Controller
    11:14:08 [ 2.375679] usb usb4: Manufacturer: Linux 3.4.82-ZS uhci_hcd
    11:14:08 [ 2.375684] usb usb4: SerialNumber: 0000:00:1d.3
    11:14:08 [ 2.376141] usb usb4: usb_probe_device
    11:14:08 [ 2.376150] usb usb4: configuration #1 chosen from 1 choice
    11:14:08 [ 2.376167] usb usb4: adding 4-0:1.0 (config #1, interface 0)
    11:14:08 [ 2.376627] hub 4-0:1.0: usb_probe_interface
    11:14:08 [ 2.376636] hub 4-0:1.0: usb_probe_interface – got id
    11:14:08 [ 2.376641] hub 4-0:1.0: USB hub found
    11:14:08 [ 2.376652] hub 4-0:1.0: 2 ports detected
    11:14:08 [ 2.376656] hub 4-0:1.0: standalone hub
    11:14:08 [ 2.376660] hub 4-0:1.0: no power switching (usb 1.0)
    11:14:08 [ 2.376664] hub 4-0:1.0: individual port over-current protection
    11:14:08 [ 2.376669] hub 4-0:1.0: power on to power good time: 2ms
    11:14:08 [ 2.376677] hub 4-0:1.0: local power source is good
    11:14:08 [ 2.376682] hub 4-0:1.0: trying to enable port power on non-switchable hub
    11:14:08 [ 2.376719] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.376854] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    11:14:08 [ 2.376862] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    11:14:08 [ 2.376874] drivers/usb/core/inode.c: creating file ‘005’
    11:14:08 [ 2.376883] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    11:14:08 [ 2.376897] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
    11:14:08 [ 2.376905] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
    11:14:08 [ 2.376933] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    11:14:08 [ 2.376948] ehci_hcd 0000:00:1d.7: debug port 1
    11:14:08 [ 2.376959] ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
    11:14:08 [ 2.380838] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    11:14:08 [ 2.380843] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
    11:14:08 [ 2.380859] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0504400
    11:14:08 [ 2.380868] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
    11:14:08 [ 2.389275] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    11:14:08 [ 2.389322] usb usb5: default language 0x0409
    11:14:08 [ 2.389335] usb usb5: udev 1, busnum 5, minor = 512
    11:14:08 [ 2.389340] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
    11:14:08 [ 2.389345] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    11:14:08 [ 2.389350] usb usb5: Product: EHCI Host Controller
    11:14:08 [ 2.389356] usb usb5: Manufacturer: Linux 3.4.82-ZS ehci_hcd
    11:14:08 [ 2.389360] usb usb5: SerialNumber: 0000:00:1d.7
    11:14:08 [ 2.391176] usb usb5: usb_probe_device
    11:14:08 [ 2.391185] usb usb5: configuration #1 chosen from 1 choice
    11:14:08 [ 2.391205] usb usb5: adding 5-0:1.0 (config #1, interface 0)
    11:14:08 [ 2.391601] ata_id used greatest stack depth: 6720 bytes left
    11:14:08 [ 2.393750] hub 5-0:1.0: usb_probe_interface
    11:14:08 [ 2.393757] hub 5-0:1.0: usb_probe_interface – got id
    11:14:08 [ 2.393763] hub 5-0:1.0: USB hub found
    11:14:08 [ 2.393783] hub 5-0:1.0: 8 ports detected
    11:14:08 [ 2.393787] hub 5-0:1.0: standalone hub
    11:14:08 [ 2.393791] hub 5-0:1.0: no power switching (usb 1.0)
    11:14:08 [ 2.393795] hub 5-0:1.0: individual port over-current protection
    11:14:08 [ 2.393800] hub 5-0:1.0: power on to power good time: 20ms
    11:14:08 [ 2.393808] hub 5-0:1.0: local power source is good
    11:14:08 [ 2.393813] hub 5-0:1.0: trying to enable port power on non-switchable hub
    11:14:08 [ 2.393891] drivers/usb/core/inode.c: creating file ‘001’
    11:14:08 [ 2.469294] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
    11:14:08 [ 2.469303] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
    11:14:08 [ 2.473527] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
    11:14:08 [ 2.473569] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
    11:14:08 [ 2.493260] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000
    11:14:08 [ 2.792988] udevadm used greatest stack depth: 6412 bytes left
    11:14:08 [ 2.828277] ISO 9660 Extensions: RRIP_1991A
    11:14:08 [ 3.112547] ISO 9660 Extensions: RRIP_1991A
    11:14:08 [ 3.127456] kjournald starting. Commit interval 5 seconds
    11:14:08 [ 3.127554] EXT3-fs (sda1): using internal journal
    11:14:08 [ 3.127561] EXT3-fs (sda1): mounted filesystem with ordered data mode
    11:14:08 [ 3.177190] udevd used greatest stack depth: 6300 bytes left
    11:14:08 [ 3.177247] udevd used greatest stack depth: 6284 bytes left
    11:14:08 [ 3.476166] usb usb4: suspend_rh (auto-stop)
    11:14:08 [ 3.476180] usb usb1: suspend_rh (auto-stop)
    11:14:08 [ 3.476217] usb usb2: suspend_rh (auto-stop)
    11:14:08 [ 3.476247] usb usb3: suspend_rh (auto-stop)
    11:14:08 [ 5.672934] ls used greatest stack depth: 6120 bytes left
    11:14:08 [ 5.696582] mount used greatest stack depth: 6100 bytes left
    11:14:08 [ 5.735908] rc used greatest stack depth: 6008 bytes left
    11:14:08 [ 5.847102] udevd[2261]: starting version 181
    11:14:08 [ 5.984236] e1000e: Intel(R) PRO/1000 Network Driver – 3.1.0.2-NAPI
    11:14:08 [ 5.984245] e1000e: Copyright(c) 1999 – 2014 Intel Corporation.
    11:14:08 [ 5.984284] e1000e 0000:02:00.0: Disabling ASPM L0s L1
    11:14:08 [ 5.984466] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    11:14:08 [ 5.984579] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X
    11:14:08 [ 5.984593] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X
    11:14:08 [ 5.984607] e1000e 0000:02:00.0: irq 46 for MSI/MSI-X
    11:14:08 [ 5.996385] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    11:14:08 [ 5.996551] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
    11:14:08 [ 6.002169] r8169 0000:05:00.0: eth0: RTL8168e/8111e at 0xf8136000, d8:9d:b9:00:10:83, XID 0c200000 IRQ 47
    11:14:08 [ 6.002178] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    11:14:08 [ 6.002210] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    11:14:08 [ 6.002369] r8169 0000:06:00.0: irq 48 for MSI/MSI-X
    11:14:08 [ 6.008103] r8169 0000:06:00.0: eth1: RTL8168e/8111e at 0xf8138000, d8:9d:b9:00:10:84, XID 0c200000 IRQ 48
    11:14:08 [ 6.008112] r8169 0000:06:00.0: eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    11:14:08 [ 6.034128] iTCO_vendor_support: vendor-support=0
    11:14:08 [ 6.038269] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    11:14:08 [ 6.042155] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
    11:14:08 [ 6.044790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    11:14:08 [ 6.109206] e1000e 0000:02:00.0: eth2: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:50
    11:14:08 [ 6.109214] e1000e 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection
    11:14:08 [ 6.109234] e1000e 0000:02:00.0: eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    11:14:08 [ 6.109258] e1000e 0000:01:00.0: Disabling ASPM L0s L1
    11:14:08 [ 6.109454] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    11:14:08 [ 6.109644] e1000e 0000:01:00.0: irq 49 for MSI/MSI-X
    11:14:08 [ 6.109658] e1000e 0000:01:00.0: irq 50 for MSI/MSI-X
    11:14:08 [ 6.109672] e1000e 0000:01:00.0: irq 51 for MSI/MSI-X
    11:14:08 [ 6.163806] coretemp coretemp.0: Unable to read TjMax from CPU 0
    11:14:08 [ 6.163837] coretemp coretemp.0: Unable to read TjMax from CPU 1
    11:14:08 [ 6.226044] e1000e 0000:01:00.0: eth3: (PCI Express:2.5GT/s:Width x1) 00:22:4d:a4:81:54
    11:14:08 [ 6.226052] e1000e 0000:01:00.0: eth3: Intel(R) PRO/1000 Network Connection
    11:14:08 [ 6.226072] e1000e 0000:01:00.0: eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
    11:14:08 [ 7.086860] kjournald starting. Commit interval 5 seconds
    11:14:08 [ 7.086897] EXT3-fs (sda1): mounted filesystem with ordered data mode
    11:14:08 [ 7.237466] ISO 9660 Extensions: RRIP_1991A
    11:14:08 [ 7.352985] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    11:14:08 [ 7.498630] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    11:14:08 [ 7.834656] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    11:14:08 [ 36.552050] Adding 131068k swap on /DB/swap-file. Priority:-1 extents:1 across:131068k SS
    11:14:08 [ 36.864500] c_rehash used greatest stack depth: 6000 bytes left
    11:14:08 [ 39.314546] ip_tables: (C) 2000-2006 Netfilter Core Team
    11:14:08 [ 39.504958] warning: `named’ uses 32-bit capabilities (legacy support in use)
    11:14:08 [ 39.978462] ctnetlink v0.93: registering with nfnetlink.
    11:14:19 [ 50.665745] Bridge firewalling registered
    11:14:19 [ 50.703469] tun: Universal TUN/TAP device driver, 1.6
    11:14:19 [ 50.703476] tun: (C) 1999-2004 Max Krasnyansky
    11:14:19 [ 50.785330] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
    11:14:20 [ 51.587423] r8169 0000:05:00.0: ETH00: link down
    11:14:20 [ 51.587441] r8169 0000:05:00.0: ETH00: link down
    11:14:20 [ 51.587790] ADDRCONF(NETDEV_UP): ETH00: link is not ready
    11:14:20 [ 51.795215] r8169 0000:06:00.0: ETH01: link down
    11:14:20 [ 51.795569] ADDRCONF(NETDEV_UP): ETH01: link is not ready
    11:14:20 [ 51.916210] ADDRCONF(NETDEV_UP): ETH02: link is not ready
    11:14:21 [ 52.036202] ADDRCONF(NETDEV_UP): ETH03: link is not ready
    11:14:21 [ 52.089901] 8021q: 802.1Q VLAN Support v1.8
    11:14:21 [ 52.089930] 8021q: adding VLAN 0 to HW filter on device ETH02
    11:14:21 [ 52.089963] 8021q: adding VLAN 0 to HW filter on device ETH03
    11:14:21 [ 52.098321] ADDRCONF(NETDEV_UP): ETH03.10: link is not ready
    11:14:21 [ 52.171045] ADDRCONF(NETDEV_UP): ETH03.20: link is not ready
    11:14:21 [ 52.244396] ADDRCONF(NETDEV_UP): ETH03.50: link is not ready
    11:14:21 [ 52.317487] ADDRCONF(NETDEV_UP): ETH03.555: link is not ready
    11:14:21 [ 52.390546] ADDRCONF(NETDEV_UP): ETH03.90: link is not ready
    11:14:21 [ 52.463404] ADDRCONF(NETDEV_UP): ETH03.99: link is not ready
    11:14:22 [ 53.233163] r8169 0000:05:00.0: ETH00: link up
    11:14:22 [ 53.233469] ADDRCONF(NETDEV_CHANGE): ETH00: link becomes ready
    11:14:22 [ 53.725435] ADDRCONF(NETDEV_UP): VPN00: link is not ready
    11:14:22 [ 53.841738] ADDRCONF(NETDEV_UP): VPN99: link is not ready
    11:14:23 [ 54.489802] e1000e: ETH03 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx
    11:14:23 [ 54.490419] ADDRCONF(NETDEV_CHANGE): ETH03: link becomes ready
    11:14:23 [ 54.491000] ADDRCONF(NETDEV_CHANGE): ETH03.10: link becomes ready
    11:14:23 [ 54.491592] ADDRCONF(NETDEV_CHANGE): ETH03.20: link becomes ready
    11:14:23 [ 54.492177] ADDRCONF(NETDEV_CHANGE): ETH03.50: link becomes ready
    11:14:23 [ 54.492811] ADDRCONF(NETDEV_CHANGE): ETH03.90: link becomes ready
    11:14:23 [ 54.493407] ADDRCONF(NETDEV_CHANGE): ETH03.99: link becomes ready
    11:14:23 [ 54.493994] ADDRCONF(NETDEV_CHANGE): ETH03.555: link becomes ready
    11:14:26 [ 57.218744] NET: Registered protocol family 15
    11:14:27 [ 58.188919] ADDRCONF(NETDEV_CHANGE): VPN99: link becomes ready
    11:14:27 [ 58.380644] EXT4-fs (sdb1): re-mounted. Opts: (null)
    11:14:33 [ 64.135024] ETH00: no IPv6 routers present
    11:14:33 [ 64.566597] ETH03.50: no IPv6 routers present
    11:14:33 [ 64.694470] ETH03.10: no IPv6 routers present
    11:14:33 [ 64.846313] dummy1: no IPv6 routers present
    11:14:33 [ 64.846325] ETH03: no IPv6 routers present
    11:14:34 [ 65.038126] ETH03.555: no IPv6 routers present
    11:14:34 [ 65.062100] ETH03.90: no IPv6 routers present
    11:14:34 [ 65.173983] ETH03.99: no IPv6 routers present
    11:14:34 [ 65.277885] ETH03.20: no IPv6 routers present
    11:14:37 [ 68.946184] VPN99: no IPv6 routers present
    11:15:18 [ 109.130348] u32 classifier
    11:15:18 [ 109.130354] Performance counters on
    11:15:18 [ 109.130357] input device check on
    11:15:18 [ 109.130360] Actions configured
    11:15:18 [ 109.872334] mutt[20891]: segfault at 2b4 ip b76f0da8 sp bff979d0 error 4 in libncurses.so.5.3[b76c8000+36000]
    11:18:58 [ 329.150036] kjournald starting. Commit interval 5 seconds
    11:18:58 [ 329.150075] EXT3-fs (sda1): mounted filesystem with ordered data mode
    11:18:58 [ 329.288125] ISO 9660 Extensions: RRIP_1991A
    11:18:58 [ 329.373614] EXT4-fs

    #53458

    Installed Packages

    23102 Bug Fixes #02 Enabled Sep 14, 2014 BugFix

    30600 New ClamAV Antivirus Scanning Engine 0.98.3 Enabled Jul 27, 2014 Feature

    48d00 Kernel with more updated Hardware Support 3.4.90 Enabled Jul 23, 2014 Add-On

    40300 Firmware and Microcode for Network Interfaces, CPU and other devices Enabled Jan 26, 2014 Add-On

    #53459

    reaperz
    Member

    I seem to have same logs, but system seems to work fine.

    Got same error messages in several routers:

    [1014629.351269] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
    [1014629.352313] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [1014629.426674] ISO 9660 Extensions: RRIP_1991A
    [1014629.568277] EXT4-fs (sda4): unable to read superblock
    [1014629.568387] EXT4-fs (sda4): unable to read superblock
    [1014629.568890] isofs_fill_super: bread failed, dev=sda4, iso_blknum=16, block=32
    [1014629.569000] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    [1014629.569439] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    [1014629.569449] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    [1014629.569453] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    [1014629.569456] UDF-fs: error (device sda4): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
    [1014629.569458] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    [1014629.569460] UDF-fs: Rescanning with blocksize 2048
    [1014629.569492] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=256, location=256
    [1014629.569498] UDF-fs: error (device sda4): udf_read_tagged: read failed, block=512, location=512
    [1014629.569500] UDF-fs: warning (device sda4): udf_load_vrs: No anchor found
    [1014629.569502] UDF-fs: warning (device sda4): udf_fill_super: No partition found (1)

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.