Forwarding a port range with zeroshell ? Home Page › Forums › Network Management › ZeroShell › Forwarding a port range with zeroshell ? This topic contains 4 replies, has 0 voices, and was last updated by olivier1010 10 years, 2 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts March 23, 2009 at 5:46 pm #41570 olivier1010Member Is it possible to forward a port range ? It seems that the GUI does not allow it. It is necessary for RTP traffic, for VOIP setups where isolated phones are on the Internet side, and when a VPN is not available. Thanks for your help. Olivier. March 24, 2009 at 8:15 am #47869 ppaliasMember Although it cannot be done on web interface you can do it directly with the iptables command. check here. March 24, 2009 at 12:42 pm #47870 olivier1010Member I’ve found a patch in this forum to update the GUI interface. Working great. I hope this will be included in the next version. Thanks. March 27, 2009 at 12:35 pm #47871 raven3433Member @olivier1010 wrote: I’ve found a patch in this forum … Can you please post the link as this will be useful for users reading this thread. Thanx in advance RaVEn March 27, 2009 at 12:49 pm #47872 ppaliasMember It is this one -> http://www.zeroshell.net/eng/forum/viewtopic.php?t=1047&highlight=port+range+patch March 31, 2009 at 11:12 am #47873 raven3433Member @ppalias wrote: It is this one -> http://www.zeroshell.net/eng/forum/viewtopic.php?t=1047&highlight=port+range+patch @ppalias: Thanx VERY MUCHO 😉 Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.