Firewall

Home Page Forums Network Management ZeroShell Firewall

This topic contains 1 reply, has 0 voices, and was last updated by  lopaka 11 years, 7 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #40826

    lopaka
    Member

    What settings would you use in the firewall to only allow access through port 80 and 21? TIA

    lopaka

    #46009

    ajl37
    Member

    Depending on your setup (Bridge or routing) you can set the default policy to drop and then setup your rules to allow ports 80 and 21. Are you talking about incoming ports or outgoing?

    Andrew

    #46010

    lopaka
    Member

    I want to prevent any clients who connect wirelessly from having access to my internal network. The setup is wireless_router->zeroshell_miniitx->gigabit_switch->DSL_router->internet.
    Despite the fact that the wireless clients are on a different range 0.X compared to 1.X, it is still possible to browse the 1.X network if you know what you’re doing. I can’t wire the connection any differently because the wireless router has to be upstairs to get the best range, and the rest of the components are downstairs.

    lopaka

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.