Firewall – Rate Limit? Home Page › Forums › Network Management › ZeroShell › Firewall – Rate Limit? This topic contains 1 reply, has 0 voices, and was last updated by brian360 11 years, 2 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts February 9, 2007 at 5:25 pm #40555 brian360Member I notice you can set a rate limit for logging firewall events, but is it also possible to set a rate limit for rule matching from the web GUI? For example, I’d like to make my system responsive to pings at no more than 1 per second on ETH01, dropping further ICMP ECHO_REQUEST packets sent at any rate faster than that. Thanks, Brian February 9, 2007 at 6:04 pm #45157 imported_fulvioParticipant Sorry, it’s not possible from the web interface. I will include this feature in one of the next releases. January 14, 2008 at 11:54 pm #45158 jozef.benikovskyMember You can also limit ICMP traffic by creating QoS rule for ICMP and combine it with maximum ICMP echo-request size in your Firewall. For instance common icmp echo-request size from windows workstation is 32+28=60B. If you create QoS class with maximum speed of 600B/s=4800bit/s, then you will allow only 10 requests/second. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.