firewall.drop input ports 80,22,443 Home Page › Forums › Network Management › ZeroShell › firewall.drop input ports 80,22,443 This topic contains 3 replies, has 0 voices, and was last updated by s_a_kravchenko 5 years, 2 months ago. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts April 7, 2014 at 6:56 am #43911 s_a_kravchenkoMember Hi. As i understand there are default rules for input policy in firewall. Such as allow access to router on ports 80,22,443. I want to make access only from my ip and my MAC. How can I do it? thanks. April 8, 2014 at 3:31 pm #53262 DrmCaParticipant There is an easy workaround. NAT those ports to a non-existing IP on your LAN and the router will not be accessible from outside. April 8, 2014 at 4:53 pm #53263 s_a_kravchenkoMember DrmCa wrote: There is an easy workaround. NAT those ports to a non-existing IP on your LAN and the router will not be accessible from outside. Thanks. nice way. April 8, 2014 at 7:07 pm #53264 redfiveParticipant But why not simply use the Web tab and SSH tab, from Setup ? Maybe I’ve missed something… Regards April 10, 2014 at 8:13 am #53265 s_a_kravchenkoMember Yes! Thank you so much! this is what i wanted. it works even when we use captive portal! Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic.