Export configurations?

Home Page › Forums › Network Management › ZeroShell › Export configurations?

This topic contains 2 replies, has 0 voices, and was last updated by  Thomas_Powers 9 years, 11 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 1, 2010 at 9:34 pm #42384

    Thomas_Powers
    Member

    Hello All…

    What is the easiest/best way to export the configurations of the Zeroshell box to a file, to be imported back into a new box should my old one fail?

    All help is appreciated…We are on 1.0 beta 12

    Thanks

    Tom P

    May 2, 2010 at 7:46 pm #50261

    ppalias
    Member

    That would be the backup procedure of course! It is already available on the web interface.
    System -> Setup -> Profiles -> Select the active profile and hit Backup.

    May 2, 2010 at 10:10 pm #50262

    atheling
    Member

    @ppalias wrote:

    That would be the backup procedure of course! It is already available on the web interface.
    System -> Setup -> Profiles -> Select the active profile and hit Backup.

    I was going to respond earlier with that but did not because I don’t know the other half of the problem… How do you restore a back up made with the above procedure?

    May 3, 2010 at 6:45 am #50263

    ppalias
    Member

    If you click the radio button of the disk partition (e.g hda3) you are given the option “Restore Profile”.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.