Excluding gateway from Net balancer Home Page › Forums › Network Management › ZeroShell › Excluding gateway from Net balancer This topic contains 0 replies, has 0 voices, and was last updated by flancer 4 years, 1 month ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts February 5, 2015 at 7:08 am #44199 flancerMember Hi, am looking for a way to prevent any Internet traffic from being routed through a gateway on the Net balancer as I need to dedicate that gateway purely for VPN purposes. Is there a way to do this? Disabling it in the Net balancer would only make Zeroshell not restarting it when it fails. February 10, 2015 at 12:43 pm #53706 jvnMember Hi Flancer, You have to set a smaller weight than the other link. default gaetway: set weight to 1, your other gateway(s): set weight to 2 (or more – reflecting your bandwidth) in the netbalancer rules, define a rule to route vpn through your default gateway. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.