ERROR: no resources available to create WLAN01 Home Page › Forums › Network Management › ZeroShell › ERROR: no resources available to create WLAN01 Tagged: Multi SSID WLAN This topic contains 0 replies, has 1 voice, and was last updated by vsmaldino 10 months, 3 weeks ago. Viewing 1 post (of 1 total) Author Posts October 25, 2018 at 9:55 pm #64511 vsmaldinoParticipant Hi all, when playing with ZS 3.8.2 on RPI 3 Model B (not B+) i got this error adding a second SSID. Some idea? Thanks all V =========================== REGULATORY DOMAIN: IT IT (ITALY) [phy0] BCM43430 Wireless Adapter (Broadcom Corp.) — If — Mode — SSID ————————– Hide — WDS — Security – >> WLAN00 AP xxxxxxxxxxxxx no no WPA-PSK COMMANDS <N> New SSID <M> Modify SSID <D> Delete SSID <I> Show Information <C> Reg-Domain/Std/Channel/Tx-Power <L> List Stations <S> Channel Scanning <R> Restarting Devices <Q> Quit >> n phy0 – BCM43430 Wireless Adapter (Broadcom Corp.) <1> Access Point <2> Client Station Mode : 1 SSID: yyyyyyy Hide SSID [no]: Wireless Distribution System (WDS) [no]: <1> Plaintext (No encryption) <2> WPA-Enterprise (RADIUS authentication) <3> WPA-PSK (Pre-Shared Key) <4> WEP Encryption : 1 WARNING: SSID yyyyyyy is not authenticated and not encrypted. WLAN01(phy0) (Mode:ap Sec:plaintext SSID:yyyyyyy Status:up) ERROR: no resources available to create WLAN01 =========================== Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.