Error 25

Home Page Forums Network Management ZeroShell Error 25

This topic contains 2 replies, has 0 voices, and was last updated by  scegg 9 years, 10 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #41907

    scegg
    Participant

    I’ve flash zeroshell beta12 into net5501 by physdiskwrite0.5.2.

    Only get a Error 25 after POST.

    What’s wrong? Have you tested?

    #48728

    scegg
    Participant

    A strange thing:
    If I power up net5501: -> Error 25
    But
    If I press Ctrl-P while booting, and type ‘reboot’, zeroshell will boot successfully.

    What’s different between cold boot and cold reboot?

    #48729

    nedhead
    Member

    According to the Soekris site, this is caused by a non-standard reaction on the CF card to some reset signal. Soekris claims that a ‘Sandisk’ CF card will not do this. I’m getting one to try and see if that fixes this problem.
    I, too, am getting the ERROR 25 message when booting from my other-brand CF card.

    #48730

    scegg
    Participant

    Yes. After changing my Kingston to Sandisk. No more error 25 again.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.