DMZ with multiple public IP´s Home Page › Forums › Network Management › Networking › DMZ with multiple public IP´s This topic contains 1 reply, has 0 voices, and was last updated by izilic 10 years, 11 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts October 6, 2008 at 5:47 pm #41219 izilicMember Hi!!! I would like to make a DMZ. My setup is as follows. I have a box with zeroshell and 3 NIC’s. 1 for the internet, one for the lan and one for the DMZ. I have 8 public IP addresses. What i would like is to forward the public IP´s to the servers in the DMZ. Those servers must be accesible from the internet AND from the lan using the public IP. Hope anyone can help me. Best regards. IAZS October 6, 2008 at 9:29 pm #46985 imported_fulvioParticipant You should wait for the new release 1.0.beta11 (next week) that allows to specify a public IP in the Virtual Server definition. At the moment, instead, you neeed to use iptables commands. Regards Fulvio October 6, 2008 at 10:01 pm #46986 izilicMember Fulvio: Thanks for your answer. I will wait for the next release. One important thing. When using the multiple public ip’s definitions, it would be very impotant that outgoing trafic from one of the servers always uses the public IP it should. Thanks again. Best regards. IAZS Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.