June 14, 2009 at 3:58 pm #41723
The Dansguardian patch has been updated to work with Zeroshell 1.0.beta12.
Further details are available at the URL http://www.zeroshell.net/eng/patch-details/#BA12
FulvioJuly 30, 2009 at 4:29 pm #48242
I have followed instructions precicely and install does not seem to be in place.
My Zeroshell version was (possibly still is) 1.0.beta11b ran the following:
root@access Database> wget http://www.zeroshell.net/listing/BA12-DansGuardian-Web-Content-Filter-22.214.171.124-1.0.beta12.tar.bz2
Resolving www.zeroshell.net... 126.96.36.199
Connecting to www.zeroshell.net[188.8.131.52]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 324,115 [application/x-bzip2]
100%[==================================================================================================================>] 324,115 145.15K/s
08:55:17 (144.77 KB/s) - `BA12-DansGuardian-Web-Content-Filter-184.108.40.206-1.0.beta12.tar.bz2' saved [324115/324115]
root@access Database> tar xvfj BA12-DansGuardian-Web-Content-Filter-220.127.116.11-1.0.beta12.tar.bz2
root@access Database> cd BA12
root@access BA12> ./install.sh
Reading configuration ...
Checking dependencies ...
Extracting packages ...
Running scripts ...
Starting updater process for the release 1.0.beta11b ...
--> Checking for installed updates:
--> Replacing files ...
--> Patching files ...
--> Running scripts ...
Syncing filesystem... Done
Restarting proxy service...
DansGuardian 18.104.22.168 has been installed. Please, read the licensing notes
at the URL http://dansguardian.org/?page=copyright2
- The configuration files are located in /etc/dansguardian. For more details
look at the URL http://www.zeroshell.net/eng/dansguardian ;
- By default, the "Access Denied" messages are logged with the IP address of
the clients. Take care to avoid to violate the privacy of the users.
To change the log level, look at the configuration item "loglevel" in the
- Keep in mind that DansGuardian works only if the transparent proxy service
is enabled and the "HTTP Capturing Rules" are configured;
- To tune the point of intervention of the filters, change the parameter
"naughtynesslimit" in the file /etc/dansguardian/dansguardianf1.conf.
And still, the GUI shows Release 1.0.beta11b .
Also I don’t have a /etc/dansguardian directory!
-JJuly 31, 2009 at 12:28 am #48243
For beta 11 you must use patch BA00
Bye.July 31, 2009 at 2:04 am #48244
Is this correct? I have installed several patches later than BA00, including C110. Do I still need to go back and install the much older patch?
-JJuly 31, 2009 at 11:09 am #48245
You can upgrade ZS to beta 12 and then install patch BA12.
For enable dans on beta 11 yuo must install BA00. This patch don’t modify configuration of other patch.
ByeJuly 31, 2009 at 2:41 pm #48246
What patch upgrades to beta12? Specifically, from beta11b, which patches do I need to install (and in which order) to get first beta12 then DansGurdian online?
-JJuly 31, 2009 at 3:29 pm #48247
You must download new version. No patch to transfrom beta 11 –> beta 12.
If you use cd version change cd and reboot. For other version reinstall. Database is the same. Attention if you need to reinstall, save the database.
ByeOctober 16, 2010 at 2:27 am #48248
You must be logged in to reply to this topic.