connecting to PPOE server

Home Page Forums Network Management ZeroShell connecting to PPOE server

This topic contains 0 replies, has 0 voices, and was last updated by  mixahlos 3 years, 12 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #44277

    mixahlos
    Member

    Hi,

    I have 3 PPOE connections on VDSL lines,
    2 days ago I bought 2 modems / routers Draytek Vigor 130.
    I setup the bridge in the modem, and when the modem connects in VDSL the PPP Interface cannot connect and the status is “connecting to PPPOE server”

    23:37:18 pppd 2.4.3 started by root, uid 0
    23:37:18 Using interface ppp0
    23:37:18 Connect: ppp0 < --> /dev/pts/1
    23:37:49 LCP: timeout sending Config-Requests
    23:37:49 Connection terminated.
    23:37:49 Using interface ppp0
    23:37:49 Connect: ppp0 < --> /dev/pts/2
    23:37:54 tcflush failed: Bad file descriptor
    23:37:54 Exit.

    When the modem connects in ADSL mode the PPPOE connection is up Again.

    Thank you

    #53798

    mixahlos
    Member

    Ok, problem solved
    In the vigor 130 is needed to enable “VLAN Tag insertion (VDSL2)
    and enter a value (this depends on ISP) in “Tag value

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.