Configure Reverse DNS Home Page › Forums › Network Management › Networking › Configure Reverse DNS This topic contains 0 replies, has 0 voices, and was last updated by sirioxx 5 years, 8 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts August 19, 2013 at 7:08 am #43715 sirioxxMember Hi all, I need help with dns configuration. I start with some questions. Do I have to create a DNS reverse zone for each domain? I noticed we can create PTR record in the forward zone. Is that correct or should it not be allowed? August 19, 2013 at 7:41 am #52837 sirioxxMember I found the right steps to follow, but please answer my questions :-). Here’s the procedure: Example: I have the zone mycompany.lan. and a host named test005.mycompany.lan with ip 192.168.2.45. Press the button CREATE to add a new zone. Select “Reverse” instead of “Forward”. Domain Name 2.168.192.in-addr.arpa Masterserver zeroshell.mycompany.lan. Email contact hostmaster.zeroshell.mycompany.lan. Then press “Submit”. Now add a new record for our host: Button: Entry Command / New (Note that record type is already selected to PTR) Hostname: test005. Entry Name: 45 Press “Save” button. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.