Compiling a network card driver? Home Page › Forums › Network Management › Linux and Networking › Compiling a network card driver? This topic contains 2 replies, has 0 voices, and was last updated by orallo 8 years, 1 month ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts April 14, 2010 at 10:39 am #42352 oralloMember Hi All, How do I compile a network card driver?? I donwloaded the source for the drivers of my lan card from the vendor (Atheros AR8131 arl1e-x.x.x.x.tar.gz) but when I try make install I get the following make -C ./src/ install make: Entering directory `/mnt/d/src’ Makefile:61: *** Linux kernel source not found. Stop. make: Leaving directory `/mnt/d/src’ make: *** [install] Error 2 Thanks for your help. Orallo September 2, 2010 at 10:16 pm #50128 RDelpopoloMember If you still need this driver, i’ve managed to compile it and i can send it to you. December 22, 2010 at 10:29 am #50129 turMember @rdelpopolo wrote: If you still need this driver, i’ve managed to compile it and i can send it to you. I also can not get this driver to work. If not hard and send me a working version. December 22, 2010 at 7:42 pm #50130 AtroposXMember You can grab the developer image on here, and follow my instructions on how to compile a driver from source… http://www.zeroshell.net/eng/forum/viewtopic.php?t=1500&postdays=0&postorder=asc&start=30 once done, you can save the driver to a flash drive or ftp it somewhere, and put it on your production server. I tried to make the commands as detailed as possible. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.