Changing 3G port in Post Boot Home Page › Forums › Network Management › ZeroShell › Changing 3G port in Post Boot This topic contains 1 reply, has 0 voices, and was last updated by anttu 9 years, 5 months ago. Viewing 1 post (of 1 total) Author Posts November 16, 2009 at 6:51 am #42041 anttuMember Hello, I need to make my Alix with ZeroShell to change the ttyUSB port in Post Boot based on the inserted modem. The idea is to have e.g. ttyUSB0 as default in GUI 3G modem setup and, when a certain modem is detected, use automatically ttyUSB2. Recognizing the modem is not a problem, but what would be the best place to change the port, i.e. where the port info could be safely edited by Post Boot script? Thanks for your help. Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.