CF image on Secondary IDE?

Home Page › Forums › Network Management › ZeroShell › CF image on Secondary IDE?

This topic contains 1 reply, has 0 voices, and was last updated by  s1037989 10 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 19, 2008 at 2:55 am #40946

    s1037989
    Member

    I’ve successfully transferred the 1.00b9 image to a CF. Unfortunately, with my hardware, the integrated CF slot is on the Secondary IDE channel but I notice that the image only works with the CF slot on the Primary IDE channel.

    This hardware cannot boot a CD-ROM. Is there anything that I can do to make my CF bootable with ZeroShell?

    March 21, 2008 at 4:13 pm #46242

    aeronet
    Member

    You can find an instructive manual made by Cristian Colombini that explains how to install ZS on HD. Here is the address:
    http://digilander.libero.it/smasherdevourer/schede/linux/Zeroshell%20su%20HD-EN.pdf
    You will find it on the Documentation seccion.

    March 23, 2008 at 3:59 pm #46243

    s1037989
    Member

    Thank you for taking the time to post the link to the document!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.