Captive Portal / WRT54GL Router

Home Page Forums Network Management ZeroShell Captive Portal / WRT54GL Router

  • This topic is empty.
Viewing 1 post (of 1 total)
  • Author
    Posts
  • #40833
    rachidi
    Member

    Hello
    Excuse for my English. Thank for your good job.
    I have problems with my Zeroshell Configuration.

    My architecture is the next :

    Users Connected by Wifi (10.0.0.0/16)
    |
    |
    Linksys WRT54GL (With Freifunk and OLSR – Wifi 10.0.1.1/16 )
    Wan 172.0.0.2/24 (OLSR)
    |
    |
    172.0.0.1/24
    ZeroShell (With 2 Network Cards)
    192.168.1.2
    | (my lan)
    |
    192.168.1.1
    Gateway
    |
    |
    (INTERNET)

    I activated the portal captive, it works well.

    My problem is that the captive portal retrieves the IP and MAC address of the Linksys router, not the IP address and MAC address of the user connected to the linksys.

    As a result, when a user is logged on , the captive portal allows access to the network without authentication for other wifi users, because the first user has transmitted the IP and mac address of linksys router.

    How can I do for captive portal retrieves the IP address or MAC address of each machine connected by WiFi linksys router?

    Thanks.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.