Captive Portal for specific subnet

Home Page Forums Network Management ZeroShell Captive Portal for specific subnet

This topic contains 1 reply, has 0 voices, and was last updated by  ultimoblaze 4 years, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #44039

    ultimoblaze
    Member

    Hi,

    Can I use a Zeroshell router controlling 1 subnet and then provide captive portal for a second subnet controlled by another router downstream? Here is a quick picture of my network:

    Zeroshell Router (192.168.0.1)
    |
    |
    /
    Clients (192.168.0.x)
    |
    |
    /
    dd-wrt Router (192.168.1.1)
    |
    |
    /
    Clients (192.168.1.x)

    I already have this set up and working correctly as shown. Clients in the 192.168.1.x subnet successfully get through to the internet and get DHCP from the server on the 192.168.0.x subnet. What I’d like is for only the clients on the 192.168.1.x subnet to get captive portal and the clients on the 192.168.0.x subnet to get free access.

    Is this possible with Zeroshell as it is now? If not, is it a limitation of the Zeroshell software or of the way captive portal works?

    Thanks,
    Ultimoblaze

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.