Captive Portal error, Urgent help needed

[SBS]

Hi all,

I installed Zeroshell, version Release 2.0.RC2, but after 3days of
stable running, it fell in the Captive Port error as following:
– Captive Portal & Accounting didn’t work anymore. When user login,
there are no information about user, IP & MAC in the Captive Portal
– Although The user certifying popup window didn’t work but user
could still access the internet
– Although I chose “ Not allowed” in Simultaneous Connections but
there was 1 user could still login for a lot PCs at the same time with
the same user
By the way, I also want to know if Captive Portal of Zerosell could
work well when there are 500 users connect to the internet at the same
time.

Best Regards,

[imported_fulvio]

Please, check your profile partition for disk usage. I think you have a disk full.

Regards
Fulvio

[trietvn]

@fulvio wrote:

Please, check your profile partition for disk usage. I think you have a disk full.

Regards
Fulvio

My disk is intel ssd 40gb full disk for zeroshell!

[trietvn]

[imported_fulvio]

You should check from setup -> profiles the actual state of the filesystem usage.
Regards
Fulvio

[SBS]

@fulvio wrote:

Please, check your profile partition for disk usage. I think you have a disk full.

Regards
Fulvio

Hi Fulvio
I have installed Zeroshell on my HDD (250GB). Then I learned that my HDD capacity turned from 250 GB to 1.4GB. How can I use my HDD with full capacity (350 GB) instead of 1.4 GB after installed Zeroshell?

Regards,

Nguyen Huynh

[Peter_H]

you can expand the partition with gparted

http://gparted.sourceforge.net/

[imported_fulvio]

Also you could just create another partion large as the free space and copy and the profile in it.

Regards
Fulvio

[Author]

Posts