captive portal and skype Home Page › Forums › Network Management › Networking › captive portal and skype This topic contains 0 replies, has 0 voices, and was last updated by marti vielha 9 years, 10 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts December 24, 2009 at 1:17 pm #42117 marti vielhaMember Hello, i have a problem. People can use Skype with no log in captive portal, do you have any idea for make this not possible? i fin this, iptables -I FORWARD 1 -i ETH00+ -j CapPort but i donÂ´t know use it. thank you December 24, 2009 at 4:59 pm #49314 marti vielhaMember Hi, the last post is not totaly correct, in the eth01 (activated in zeroshell captive portal) the captive portal works fine, canÂ´t connect to skype. but in the other eth04 captive portal the skype works with no login in captive portal, for make eth04 C P y make this http://www.zeroshell.net/eng/forum/viewtopic.php?p=4318&highlight=#4318 adding this: you must change only cp_start. example. iptables -A CapPort -i ETH02 -j CapPortACL iptables -t nat -A CapPort -i ETH02 -p tcp –dport 80 -j CapPortHTTP iptables -t nat -A CapPort -i ETH02 -p tcp –dport 443 -j CapPortHTTPS iptables -t nat -A CapPort -i ETH02 -p tcp –dport $REMOTEPT -j CapPortGW iptables -t nat -A CapPort -i ETH02 -p tcp –dport $REMOTESSL -j CapPortGW insert this line ar bottom of cp_start iptables -I SYS_INPUT 3 -i ETH02 -p tcp –dport 12080:12083 -j ACCEPT for enable ETH02 for another interface change 3 with 4. first interface (ETH01) is enable from web interface. In web interface you must select for Client Identity only ip address. Any idea for close connection skype and more in the eth modified with this method. Thank you Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.