Captive portal…

Home Page Forums Network Management ZeroShell Captive portal…

This topic contains 0 replies, has 0 voices, and was last updated by  7andY 9 years, 11 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41775

    7andY
    Member

    Hi,
    I have set up Zeroshell as a routed Captive Portal, with 192.168.n.n on one side and 10.7.n.n on the other. I have set up NAT, AD Authentication works fine, and I’ve set up DNS to use my local DNS Servers as forwarders, and everything works – almost!!

    The problem is, our organisation uses a proxy server for all Internet accesses on the 10.7.n.n side. If I put this proxy address into Internet Explorer on the 192.168.n.n side, I cannot access the logon portal page. If I remove it I can, but the Internet won’t work until I put this address back in after authentication!

    Can anyone suggest how I can fix this?

    Cheers, Andy E.

    #48392

    7andY
    Member

    FIXED: I have enabled HTTP Proxy, with a 0.0.0.0/0 destination.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.