Can’t push route to L2L vpn

Home Page › Forums › Network Management › Signal a BUG › Can’t push route to L2L vpn

This topic contains 1 reply, has 0 voices, and was last updated by  HakanL 10 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 21, 2008 at 4:41 pm #41153

    HakanL
    Member

    I try to set up parameters on the lan-to-lan setup to push a route to the client. I’ve tried various combinations of quotes, etc. This is what I’m trying to set it to –push “route 10.0.0.0 255.0.0.0”. I can do it successfully on the host2lan setup, but not lan2lan.

    August 21, 2008 at 7:50 pm #46824

    imported_fulvio
    Participant

    You are right. In the 1.0.beta10 I corrected this issue for the Road Warrior OpenVPN, but forgot to make the same changes for lan-to-lan VPN.
    You will have to wait for the next release in September.

    Regards
    Fulvio

    August 21, 2008 at 8:27 pm #46825

    HakanL
    Member

    Ah, thanks for the quick reply. That’s ok, I just added it to the client side config for now.

    /Hakan

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.