can’t ping the gateway Home Page › Forums › Network Management › Networking › can’t ping the gateway This topic contains 2 replies, has 0 voices, and was last updated by daeressea 10 years, 7 months ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts June 23, 2009 at 10:03 am #41738 daeresseaMember hi, i have some issues trying to make a firewall with zeroshell… i have a box with two cards: eth00: 192.168.9.75 eth01: 192.168.1.200 gateway: 192.168.1.254 dhcp server on 192.168.9.0/24 if i put a PC behind 192.168.9.75 i can’t ping the gateway nor internet IP’s. any ideas? i am behind a freebox… thanks pierre June 23, 2009 at 1:42 pm #48303 giancagiancaMember Enable nat for eth01 (in router) gateway for pc is 192.168.9.75 default gateway for ZS is 192.168.1.254 bye June 23, 2009 at 1:51 pm #48304 daeresseaMember thanks, but i already done this. i can ping both eth00 an 01 but no internet IP and gateway… i dont understand. June 23, 2009 at 4:21 pm #48305 daeresseaMember ok i have soled the problem. i just bridge the two networks and specify the dns forwaders ip… but i have made another ZSbox and it works normally. now i have a tunnel up between my two networks (184.108.40.206;192.168.2.0)but i cant reach the first. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.