Can’t ping across Site to Site VPN

Home Page Forums Network Management VPN Can’t ping across Site to Site VPN

This topic contains 1 reply, has 0 voices, and was last updated by  trickyclimber 7 years, 11 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #43083

    I’m having an issue with my Site to Site VPN I just set up.
    The VPN is connected and looks good.
    Both sites using ZS.

    Site A can ping the ZS at Site B but no other devices in that network. I’m not that adept at Linux firewalls, but it seems like something small I’m missing.

    When I try to ping 192.168.170.5 (for example) I get a destination host unreachable on each reply.

    Thanks!
    Patrick

    #51884

    Alderon
    Participant

    In case that your LAN and VPN interfaces are not bridged, check routing tables in both ZS boxes. There probably would be missing routes to your LAN networks on other sides of VPN. Add some static routes or enable and configure dynamic (RIP) routing. Also check, that your LANs haven`t the same network adresses.

    #51885

    Thanks! RIP worked perfectly!

    Patrick

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.