Can't boot Zeroshell 3.9.3A on Raspberry Pi 3 B Rev. 2

Home Page › Forums › Network Management › ZeroShell › Can't boot Zeroshell 3.9.3A on Raspberry Pi 3 B Rev. 2

Tagged: 

Viewing 1 post (of 1 total)
  • Author
    Posts
  • December 12, 2019 at 2:20 pm #65664
    Michael Stiefler
    Participant

    As the title says, Zeroshell 3.9.3A fails to boot on my Raspberry Pi 3 B Rev.2
    Zeroshell 3.9.0A works flawlessly from the same SD card.
    The whole boot process of 3.9.3A looks plain wrong and it fails right after ETH0 init, when attempting to mount further partitions past the boot one.
    Tried to re-download the image, tried to rebuild the SD card from it a couple of times, each to no avail.
    As mentioned, using the very same SD card prepared with the very same tool (“USB Image Tool”), Zeroshell 3.9.0A works straight away.

    Best regards,
    Michael Stiefler

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.